ELTAKO 2-channel time switch with display and Bluetooth – 23200902

2-channel time switch with display and Bluetooth. Channel 1 with 1 normally open contact, potential-free 16A/250VAC and DX. Channel 2 with 1 OptoMOS semiconductor output, potential-free 50mA/12..230VUC, e.g. for controlling an electronic relay (ER) or an impulse group switch (EGS). With display lighting and astro function. Stand-by loss only 0.1-0.3 watts. Supply voltage and control voltage for central control 12..230VUC. Series installation device for mounting on DIN-EN 60715 TH35 mounting rail. 1 module = 18 mm wide, 58 mm deep. With the patented Eltako Duplex technology (DX), the normally potential-free contact 1 can still switch in the zero crossing when switching 230V/50Hz AC voltage, thus drastically reducing wear. To do this, simply connect the neutral conductor to the (N) terminal and L to 1 (L). This results in an additional standby loss of only 0.1 watt. Up to 60 time switch memory locations are freely distributed among the channels. With date and automatic summer/winter time changeover. Power reserve without battery approx. 7 days. Each memory location can be assigned either the astro function (automatic switching after sunrise or sunset), the on and off time, or a pulse switching time (delivery state 2 seconds). The on or off time Astro can be shifted by up to ± 2 hours. In addition, a time shift of up to ± 2 hours, influenced by the solstices, can be entered. With control input (+A1) for central control ON or OFF with priority. The time switch is set either via Bluetooth with the app or with the MODE and SET buttons; a key lock is possible. The display lighting switches on when MODE or SET is pressed for the first time. 20 seconds after the last MODE or SET operation, the program automatically returns to the normal display and the display lighting switches off. Set time switch with the app: Press SET, BLE (Bluetooth) and the ID of the time switch appear on the display. The connection to the app can now be established (delivery state passkey 123123). Scan the QR code on the operating instructions, the app guides you through the learning process. After the connection to the app has been established, BLE+ appears on the display. The MODE and SET buttons are now locked. Bluetooth reset (delete possibly changed passkey): The connection to the app must be disconnected. Press MODE and SET simultaneously for 2 seconds, RES flashes on the display. Now press SET for 2 seconds, bLE appears on the display. If confirmed with MODE, the BLE reset is performed, the passkey is deleted and the delivery state is restored. Set time switch with the MODE and SET buttons: Set language: After each power supply is connected, the language can be selected with SET within 10 seconds and confirmed with MODE. D = German, GB = English, F = French, IT = Italian and ES = Spanish. The normal display then appears: weekday, time, day and month. Fast run: In the following settings, the numbers run up quickly when the enter key is pressed longer. Releasing and pressing longer again changes the direction. Set time: Press MODE and then search for the function UHR (time) at PRG with SET and select it with MODE. At S, select the hour with SET and confirm with MODE. Proceed similarly for M as minute. Set date: Press MODE and then search for the function DAT (date) at PRG with SET and select it with MODE. At J, select the year with SET and confirm with MODE. Proceed similarly for M as month and T as day. The last setting in the sequence is MO (weekday) flashing. This can be set with SET and confirmed with MODE. Further settings such as location for astro function, manual switching ON or OFF, summer/winter time changeover, central control ON or OFF, random mode, key lock and input of the time switch programs according to the operating instructions.