WILO Wilo Smart-Pump Stratos MAXO-Z 30/0.5-8 PN10 (DE) – 2186247

Premium Smart Pump Wilo-Stratos MAXO-ZHigh-efficiency in-line glandless pump with EC motor and electronic power adjustment. Can be used for potable water as well as heating water, cold water, and water-glycol mixtures. Energy efficiency index (EEI) between ≤ 0.17 and ≤ 0.19 depending on the pump type.Control modes:Permanent, automatic power adjustment to system requirements without setpoint specification Wilo-Dynamic Adapt plus. Up to 20% energy saving compared to dp-v control mode.Constant temperature (T-const., factory setting)Constant differential temperature (dT-const.)Demand-driven flow optimisation of the feeder pump through networking and communication with multiple pumps (Multi-Flow Adaptation).Constant flow rate (Q-const.)Differential pressure control dp-c at a remote point in the pipe network (poor point control)Constant differential pressure (dp-c)Variable differential pressure (dp-v) with the option of nominal operating point entryConstant speed (n-const.)User-defined PID controlFunctions:Heat quantity detectionCooling quantity detectionAutomatic pump shutdown with zero flow detection (No-Flow Stop)Switching between heating and cooling operation (automatic, external or manual)Adjustable flow rate limitation using Q-Limit function (Qmin. and Qmax.)Twin pump operating modes: efficiency-optimised addition mode for dp-c and dp-v, main/standby modeSave and restore configured pump settings (3 restore points)Fault/warning message display in plain text including recommended remediesVentilation function for automatic venting of the rotor chamberAutomatic night setbackAutomatic deblocking function and integrated full motor protectionDry-running detectionAutomatic detection of thermal disinfection (for domestic hot water circulation) in conjunction with a separate temperature sensorDisplay:Control modeSet pointFlow rateTemperaturePower consumptionElectrical consumptionActive influences (e.g. STOP, No-Flow Stop)Design:2 configurable analogue inputs: 0-10 V, 2-10 V, 0-20 mA, 4-20 mA and standard Pt1000; power supply with +24 V DC2 configurable digital inputs (Ext. OFF, Ext. Min, Ext. Max, Heating/Cooling, Manual override (building automation decoupled), Operating lock (key lock and remote control configuration protection))2 configurable signal relays for operating and fault messagesSlot for Wilo-CIF modules with interfaces for building automation GA (Optional accessories: CIF modules Modbus RTU, Modbus TCP, BACnet MS/TP, BACnet IP, LON, PLR, CAN)Wilo Net as Wilo system bus for communication between Wilo products, e.g. Multi-Flow Adaptation; twin pump operation and Wilo-Smart GatewayIntegrated temperature sensorAutomatic emergency operation in special conditions (pump speed definable) e.g. in case of bus communication failure or sensor value failureGraphical colour display (4.3 inch) with operation via one-button manual control levelReading and setting operating data as well as creating a commissioning report via Bluetooth interface (without additional accessories) using the Wilo Assistant AppCable break detection for analogue signals (in conjunction with 2-10 V or 4-20 mA)Outdoor installation with weather protection possible according to installation and operating instructionsDate and time presetThermal insulation shell for heating applications5-year warrantyScope of delivery:PumpOptimised Wilo-Connector2x cable glands M16 x 1.5Washers for flange screws M12 and M16 (for connection nominal widths DN 32 to DN 65)2x gaskets for threaded connectionThermal insulation shellInstallation and operating instructions (digital)Optional accessories:ClimaForm cold insulation to prevent condensationCIF module: Modbus TCP, Modbus RTU, BACnet IP, BACnet MS/TP, LON, PLR, CANPt1000 (B) pipe clamp sensor (for domestic hot water)Pt1000 (AA) sensor for installation in immersion sleeveDifferential pressure sensorOperating dataFluid: Water, ethylene glycol, propylene glycolMax. medium temperature: 80 °CMin. medium temperature: 0 °CMin. ambient temperature: 0 °CMax. ambient temperature: 40 °CTemperature range at max. ambient temperature +40 °C: -10...+110Maximum operating pressure: 10 barMinimum inlet head at 50°C: 3 mMinimum inlet head at 95°C: 10 mMinimum inlet head at 110°C: 16 mMax. permissible total water hardness: 3.57 mmol/l (20 °dH)Motor dataEnergy efficiency index (EEI): 0.19Mains connection: 1~230 V ±10%, 50/60 HzCurrent (min): 0.11 ACurrent (max): 1.05 ANominal motor power: 133 WSpeed min.: 750 rpmSpeed max.: 3600 rpmPower consumption: 7 WPower consumption: 160 WElectromagnetic emission: EN 61800-3;2004+A1;2012 / Residential area (C1)Electromagnetic immunity: EN 61800-3;2004+A1;2012 / Industrial area (C2)Insulation class: FProtection class: IPX4DCable gland: 5 x M16x1.5MaterialsPump casing: Stainless steelImpeller: PPS-GF40Shaft: Stainless steelBearings: Carbon graphiteInstallation dimensionsSuction side pipe connection: G 2Pressure side pipe connection: G 2Overall length: 180 mmOrdering informationMake: WiloNet weight approx.: 7.5 kgItem number: 2186247