WILO Wilo Smart Pump Stratos MAXO-Z 30/0.5-12 PN10 (DE) – 2186248

Premium smart pump Wilo-Stratos MAXO-ZHigh-efficiency inline glandless pump with EC motor and electronic power adjustment. Can be used for drinking water as well as heating water, cold water and water-glycol mixtures. Energy efficiency index (EEI) between ≤ 0.17 and ≤ 0.19, depending on the pump type.Control modes:Permanent, automatic power adjustment to system requirements without setpoint specification Wilo-Dynamic Adapt plus. Up to 20% energy savings compared to dp-v control mode.Constant temperature (T-const., factory setting)Constant differential temperature (dT-const.)Demand-driven volume flow optimisation of the booster pump through networking and communication with multiple pumps (Multi-Flow Adaptation).Constant volume flow (Q-const.)Differential pressure control dp-c at a remote point in the pipe network (remote setpoint control)Constant differential pressure (dp-c)Variable differential pressure (dp-v) with option for nominal operating point inputConstant speed (n-const.)User-defined PID controlFunctions:Heat quantity meteringCooling quantity meteringAutomatic pump shutdown when zero flow is detected (No-Flow Stop)Switching between heating and cooling mode (automatic, external or manual)Adjustable volume flow limitation via Q-Limit function (Qmin. and Qmax.)Dual pump operating modes: Efficiency-optimised additive operation for dp-c and dp-v, main/standby operationSave and restore configured pump settings (3 restore points)Plain text fault message/warning message display including troubleshooting recommendationsVentilation function for automatic venting of the rotor chamberAutomatic night setbackAutomatic deblocking function and integrated full motor protectionDry-running detectionAutomatic detection of thermal disinfection (for domestic hot water circulation) in conjunction with a separate temperature sensorDisplay:Control modeSet pointVolume flowTemperaturePower consumptionElectrical consumptionActive influences (e.g. STOP, No-Flow Stop)Design:2 configurable analog inputs: 0-10 V, 2-10 V, 0-20 mA, 4-20 mA and commercial Pt1000; power supply with +24 V DC2 configurable digital inputs (Ext. OFF, Ext. Min, Ext. Max, Heating/Cooling, Manual override (BMS decoupled), Control panel lock (keypad lock and remote control configuration protection))2 configurable signal relays for operating and fault messagesSlot for Wilo-CIF modules with interfaces for building automation BA (Optional accessories: CIF modules Modbus RTU, Modbus TCP, BACnet MS/TP, BACnet IP, LON, PLR, CAN)Wilo Net as Wilo system bus for communication between Wilo products, e.g. Multi-Flow Adaptation; dual pump operation and Wilo-Smart GatewayIntegrated temperature sensorAutomatic emergency operation in special conditions (pump speed definable) e.g. in case of bus communication failure or sensor value failureGraphical colour display (4.3 inch) with one-button manual controlRead out and set operating data and, for example, create a commissioning report via Bluetooth interface (without further accessories) using the Wilo Assistant AppCable break detection for analog signal (in conjunction with 2-10 V or 4-20 mA)Outdoor installation with weather protection possible according to installation and operating instructionsDate and time pre-setThermal insulation shell for heating applications5-year warrantyScope of delivery:PumpOptimised Wilo-Connector2x cable gland M16 x 1.5Washers for flange screws M12 and M16 (for nominal connection sizes DN 32 to DN 65)2x gaskets for threaded connectionThermal insulation shellInstallation and operating instructions (digital)Optional accessories:ClimaForm insulation to prevent condensationCIF module: Modbus TCP, Modbus RTU, BACnet IP, BACnet MS/TP, LON, PLR, CANPt1000 (B) pipe clamp sensor (for domestic hot water)Pt1000 (AA) sensor for installation in immersion sleeveDifferential pressure sensorOperating dataFluid: Water, ethylene glycol, propylene glycolMax. fluid temperature: 80 °CMin. fluid temperature: 0 °CMin. ambient temperature: 0 °CMax. ambient temperature: 40 °CTemperature range at max. ambient temperature +40 °C: -10...+110Maximum operating pressure: 10 barMinimum inlet pressure at 50°C: 3 mMinimum inlet pressure at 95°C: 10 mMinimum inlet pressure at 110°C: 16 mMax. permissible total water hardness: 3.57 mmol/l (20 °dH)Motor dataEnergy efficiency index (EEI): 0.19Mains connection: 1~230 V ±10%, 50/60 HzCurrent (min): 0.11 ACurrent (max): 1.28 AMotor rated power: 262 WSpeed min.: 750 rpmSpeed max.: 4350 rpmPower consumption: 7 WPower consumption: 295 WInterference emission: EN 61800-3;2004+A1;2012 / Residential area (C1)Interference immunity: EN 61800-3;2004+A1;2012 / Industrial area (C2)Insulation class: FProtection class: IPX4DCable gland: 5 x M16x1.5MaterialsPump housing: Stainless steelImpeller: PPS-GF40Shaft: 1.4122, DLC-coatedBearing: Carbon graphiteInstallation dimensionsSuction side pipe connection: G 2Pressure side pipe connection: G 2Overall length: 180 mmOrder informationManufacturer: WiloNet weight approx.: 7.8 kgArticle number: 2186248