WILO Wilo Smart Pump Stratos MAXO-D 65/0.5-12 PN6/10 (DE) - 2186235

Premium smart pump Wilo-Stratos MAXO-DHighly efficient inline glandless twin pump with EC motor and electronic power adjustment. Can be used for heating water, cold water and water-glycol mixtures. Energy Efficiency Index (EEI) depending on pump type between ≤ 0.17 and ≤ 0.19.Control modes:Permanent, automatic power adjustment to the system requirements without setpoint specification Wilo-Dynamic Adapt plus (factory setting). Up to 20% energy saving compared to dp-v control mode.Constant temperature (T-const.)Constant differential temperature (dT-const.)Demand-oriented flow rate optimisation of the booster pump by networking and communication with several pumps (Multi-Flow Adaptation).Constant flow rate (Q-const.)Differential pressure control dp-c at a remote point in the pipe network (poor point control)Constant differential pressure (dp-c)Variable differential pressure (dp-v) with the option of nominal operating point inputConstant speed (n-const.)User-defined PID controlFunctions:Heat quantity acquisitionCold quantity acquisitionAutomatic pump shutdown when zero-flow is detected (No-Flow Stop)Switching between heating and cooling mode (automatic, external or manual)Adjustable flow rate limitation by Q-Limit function (Qmin. and Qmax.)Twin pump operating modes: Efficiency-optimised additive operation for dp-c and dp-v, main/standby operationSave and restore configured pump settings (3 restore points)Plain text fault/warning message display including remedy recommendationVentilation function for automatic de-aeration of the rotor chamberAutomatic night setbackAutomatic deblocking function and integrated full motor protectionDry-running detectionDisplay:Control modeSet pointFlow rateTemperaturePower consumptionElectrical consumptionActive influences (e.g. STOP, No-Flow Stop)Design:2 configurable analogue inputs: 0-10 V, 2-10 V, 0-20 mA, 4-20 mA and standard Pt1000; power supply with +24 V DC2 configurable digital inputs (Ext. OFF, Ext. Min, Ext. Max, Heating/Cooling, Manual Override (building automation decoupled), Operation Lock (keypad lock and remote control configuration protection))2 configurable alarm relays for operating and fault messagesSlot for Wilo-CIF modules with interfaces for building automation BA (Optional accessories: CIF modules Modbus RTU, Modbus TCP, BACnet MS/TP, BACnet IP, LON, PLR, CANopen)Wilo Net as Wilo system bus for communication between Wilo products, e.g. Multi-Flow Adaptation; twin pump operation and Wilo-Smart GatewayTemperature sensor integratedAutomatic emergency operation in special conditions (pump speed definable) e.g. in case of bus communication or sensor value failureGraphic colour display (4.3 inch) with one-button manual controlRead out and set operating data and, for example, create a commissioning report via Bluetooth interface (without additional accessories) using the Wilo Assistant AppTwin pump management integrated (twin pumps are pre-wired), when using 2 single pumps as a twin pump unit, connection via WILO NetCable break detection for analogue signal (in conjunction with 2-10 V or 4-20 mA)Outdoor installation with weather protection possible according to installation and operating instructionsDate and time pre-set5 years warrantyScope of deliveryPump2x optimised Wilo-Connector for all sizes the same4x cable gland M16 x 1.5Washers for flange bolts M12 and M16 (for connection nominal widths DN 32 to DN 65)2x seals for threaded connectionInstallation and operating instructions (digital)Optional accessories:CIF module: Modbus TCP, Modbus RTU, BACnet IP, BACnet MS/TP, LON, PLR, CANopenPt1000 (B) pipe contact sensor (for domestic hot water)Pt1000 (AA) sensor for installation in immersion sleeveDifferential pressure sensorOperating dataFluid media: Water, ethylene glycol, propylene glycolMin. media temperature: -10 °CMax. media temperature: 110 °CMin. ambient temperature: -10 °CMax. ambient temperature: 40 °CMaximum operating pressure: 10 barMin. inlet head at 50°C: 7 mMin. inlet head at 95°C: 15 mMin. inlet head at 110°C: 23 mMotor dataEnergy Efficiency Index (EEI): 0.17Mains connection: 1~230 V ±10%, 50/60 HzCurrent (min): 0.3 ACurrent (max): 4.17 AMotor nominal power: 826 WSpeed min.: 500 rpmSpeed max.: 3000 rpmPower consumption: 20 WPower consumption: 950 WInterference emission: EN 61800-3;2004+A1;2012 / residential area (C1)Immunity to interference: EN 61800-3;2004+A1;2012 / industrial area (C2)Insulation class: FProtection class: IPX4DCable gland: 5 x M16x1.5MaterialsPump casing: Cast ironImpeller: PPS-GF40Shaft: Stainless steelBearing: Carbon, antimony-impregnatedInstallation dimensionsSuction side pipe connection: DN 65Pressure side pipe connection: DN 65Installation length: 340 mmOrdering informationMake: WiloNet weight approx.: 61.3 kgItem number: 2186235