WILO Wilo Smart Pump Stratos MAXO-D 32/0.5-8 PN6/10 (DE) – 2186224

Premium Smart Pump Wilo-Stratos MAXO-DHighly efficient inline glandless twin-head pump with EC motor and electronic power adjustment. Can be used for heating water, cold water and water-glycol mixtures. Energy Efficiency Index (EEI) between ≤ 0.17 and ≤ 0.19, depending on the pump type.Control modes:Permanent, automatic power adjustment to the system requirements without a setpoint Wilo-Dynamic Adapt plus (factory setting). Up to 20% energy saving compared to dp-v control mode.Constant temperature (T-const.)Constant differential temperature (dT-const.)Demand-driven flow optimisation of the feeder pump through networking and communication with several pumps (Multi-Flow Adaptation).Constant volume flow (Q-const.)Differential pressure control dp-c at a remote point in the pipe network (poor point control)Constant differential pressure (dp-c)Variable differential pressure (dp-v) with the option of nominal operating point inputConstant speed (n-const.)User-defined PID controlFunctions:Heat quantity detectionCooling quantity detectionAutomatic pump shutdown upon zero flow detection (No-Flow Stop)Switching between heating and cooling operation (automatic, external or manual)Adjustable volume flow limitation by Q-Limit function (Qmin. and Qmax.)Operating modes twin-head pumps: Efficiency-optimised addition operation for dp-c and dp-v, main/standby operationStore and restore configured pump settings (3 restore points)Plain text fault/warning message display including troubleshooting recommendationVentilation function for automatic venting of the rotor spaceAutomatic night setbackAutomatic deblocking function and integrated full motor protectionDry-running detectionDisplay:Control modeSet pointVolume flowTemperaturePower consumptionElectrical consumptionActive influences (e.g. STOP, No-Flow Stop)Design:2 configurable analogue inputs: 0-10 V, 2-10 V, 0-20 mA, 4-20 mA and commercially available Pt1000; power supply with +24 V DC2 configurable digital inputs (Ext. OFF, Ext. Min, Ext. Max, Heating/Cooling, Manual Override (building automation disconnected), Operation Lock (key lock and remote control configuration protection))2 configurable signal relays for operation and fault messagesSlot for Wilo-CIF modules with interfaces for building automation BA (Optional accessories: CIF modules Modbus RTU, Modbus TCP, BACnet MS/TP, BACnet IP, LON, PLR, CANopen)Wilo Net as Wilo system bus for communication between Wilo products, e.g. Multi-Flow Adaptation; twin-head pump operation and Wilo-Smart GatewayTemperature sensor integratedAutomatic emergency operation in special conditions (pump speed definable) e.g. in case of bus communication failure or sensor values failureGraphic colour display (4.3 inch) with one-button manual controlReading and setting operating data and, for example, creating a commissioning report via Bluetooth interface (without additional accessories) using the Wilo Assistant AppTwin-head pump management integrated (twin-head pumps are pre-wired), when using 2 single pumps as a twin-head pump unit, connection via WILO NetCable break detection for analogue signal (in conjunction with 2-10 V or 4-20 mA)Outdoor installation with weather protection possible according to installation and operating instructionsDate and time preset5 years warrantyScope of deliveryPump2x optimised Wilo-Connector for all sizes the same4x cable gland M16 x 1.5Washers for flange screws M12 and M16 (for connection nominal widths DN 32 to DN 65)2x seals for threaded connectionInstallation and operating instructions (digital)Optional accessories:CIF module: Modbus TCP, Modbus RTU, BACnet IP, BACnet MS/TP, LON, PLR, CANopenPt1000 (B) pipe clamp sensor (for domestic hot water)Pt1000 (AA) sensor for installation in immersion sleeveDifferential pressure sensorOperating dataFluid: Water, ethylene glycol, propylene glycolMin. fluid temperature: -10 °CMax. fluid temperature: 110 °CMin. ambient temperature: -10 °CMax. ambient temperature: 40 °CMaximum operating pressure: 10 barMinimum inlet head at 50°C: 3 mMinimum inlet head at 95°C: 10 mMinimum inlet head at 110°C: 16 mMotor dataEnergy Efficiency Index (EEI): 0.19Mains connection: 1~230 V ±10%, 50/60 HzCurrent (min): 0.11 ACurrent (max): 1.1 AMotor rated power: 133 WSpeed min.: 750 rpmSpeed max.: 3550 rpmPower consumption: 7 WPower consumption: 160 WEmitted interference: EN 61800-3;2004+A1;2012 / Residential area (C1)Immunity to interference: EN 61800-3;2004+A1;2012 / Industrial area (C2)Insulation class: FProtection class: IPX4DCable gland: 5 x M16x1.5MaterialsPump housing: Cast ironImpeller: PPS-GF40Shaft: Stainless steelBearings: Carbon graphiteInstallation dimensionsSuction-side pipe connection: DN 32Pressure-side pipe connection: DN 32Installation length: 220 mmOrdering informationMake: WiloNet weight approx.: 20.4 kgArticle number: 2186224