WILO Wilo Smart-Pump Stratos MAXO 50/0.5-14 PN6/10 (DE) – 2186206

Premium Smart Pump Wilo-Stratos MAXOHigh-efficiency inline glandless pump with EC motor and electronic power adjustment. Can be used for heating water, cold water, and water-glycol mixtures. Energy Efficiency Index (EEI) between ≤ 0.17 and ≤ 0.19, depending on the pump type.Control modes:Permanent, automatic power adjustment to system requirements without setpoint specification Wilo-Dynamic Adapt plus (factory setting). Up to 20% energy saving compared to dp-v control mode.Constant temperature (T-const.)Constant differential temperature (dT-const.)Demand-driven volume flow optimization of the booster pump through networking and communication with multiple pumps (Multi-Flow Adaptation).Constant volume flow (Q-const.)Differential pressure control dp-c at a remote point in the pipe network (poor point control)Constant differential pressure (dp-c)Variable differential pressure (dp-v) with the option of nominal operating point inputConstant speed (n-const.)User-defined PID controlFunctions:Heat quantity measurementCold quantity measurementAutomatic shutdown of the pump upon zero flow detection (No-Flow Stop)Switching between heating and cooling mode (automatic, external, or manual)Adjustable volume flow limitation via Q-Limit function (Qmin. and Qmax.)Operating modes twin pumps: Efficiency-optimized additive operation for dp-c and dp-v, main/standby operationSave and restore configured pump settings (3 restore points)Fault/warning message display in plain text including recommended remediesVentilation function for automatic venting of the rotor chamberAutomatic night setbackAutomatic deblocking function and integrated full motor protectionDry-run detectionDisplay:Control modeSetpointVolume flowTemperaturePower consumptionElectrical consumptionActive influences (e.g., STOP, No-Flow Stop)Design:2 configurable analog inputs: 0-10 V, 2-10 V, 0-20 mA, 4-20 mA and standard Pt1000; power supply with +24 V DC2 configurable digital inputs (Ext. OFF, Ext. Min, Ext. Max, Heating/Cooling, Manual override (building automation decoupled), Operating lock (button lock and remote control configuration protection))2 configurable signal relays for operating and fault messagesSlot for Wilo-CIF modules with interfaces for building automation BA (Optional accessories: CIF modules Modbus RTU, Modbus TCP, BACnet MS/TP, BACnet IP, LON, PLR, CANopen)Wilo Net as Wilo system bus for communication between Wilo products, e.g., Multi-Flow Adaptation; twin pump operation and Wilo-Smart GatewayIntegrated temperature sensorAutomatic emergency operation in special conditions (pump speed definable) e.g., in case of bus communication failure or sensor value failureGraphical color display (4.3 inches) with operation via one-button manual control levelRead out and set operating data as well as, e.g., create a commissioning report via Bluetooth interface (without additional accessories) using the Wilo Assistant AppTwin pump management integrated (twin pumps are pre-wired), when using 2 single pumps as a twin pump unit, connection via WILO NetCable break detection for analog signal (in conjunction with 2-10 V or 4-20 mA)Outdoor installation with weather protection possible according to installation and operating instructionsDate and time presetThermal insulation shell for heating applications5-year warrantyScope of deliveryPumpOptimized Wilo-Connector for all sizes the same2x cable glands M16 x 1.5Washers for flange screws M12 and M16 (for nominal connection sizes DN 32 to DN 65)2x gaskets for threaded connectionThermal insulation shellInstallation and operating instructions (digital)Optional accessories:ClimaForm cold insulation to prevent condensationCIF module: Modbus TCP, Modbus RTU, BACnet IP, BACnet MS/TP, LON, PLR, CANopenPt1000 (B) pipe clamp sensor (for domestic hot water)Pt1000 (AA) sensor for installation in immersion sleeveDifferential pressure sensorOperating dataFlow medium: Water, ethylene glycol, propylene glycolMin. medium temperature: -10 °CMax. medium temperature: 110 °CMin. ambient temperature: -10 °CMax. ambient temperature: 40 °CMaximum operating pressure: 10 barMinimum inlet height at 50°C: 7 mMinimum inlet height at 95°C: 15 mMinimum inlet height at 110°C: 23 mMotor dataEnergy Efficiency Index (EEI): 0.17Mains connection: 1~230 V ±10%, 50/60 HzCurrent (min): 0.3 ACurrent (max): 4.27 ARated motor power: 844 WSpeed min.: 500 rpmSpeed max.: 3200 rpmPower consumption: 20 WPower consumption: 970 WEmission of interference: EN 61800-3;2004+A1;2012 / Residential area (C1)Immunity to interference: EN 61800-3;2004+A1;2012 / Industrial area (C2)Insulation class: FProtection type: IPX4DCable gland: 5 x M16x1.5MaterialsPump housing: Cast ironImpeller: PPS-GF40Shaft: Stainless steelBearing: Carbon, antimony impregnatedInstallation dimensionsSuction-side pipe connection: DN 50Pressure-side pipe connection: DN 50Installation length: 340 mmOrdering informationMake: WiloNet weight approx.: 28 kgArticle number: 2186206