WILO Wilo Fluidcontrol Electronic Flow and Pressure Monitor EK with Cable – 4190895

Electronic control and regulating accessories. The Wilo-HiControl 1 series is used for clear water pumps to enable automatic operation. Wilo-HiControl 1 protects the pump from low flow operation. Thanks to a flow sensor and pressure sensor, Wilo-HiControl 1 automates the pump between two values, the cut-in pressure and the cut-off flow. If the pressure in the network is lower than the cut-in pressure, Wilo-HiControl 1 starts the pump. The pump operates until the flow falls below the cut-off flow value. The internal, small tank prevents water hammer and cycling. The Wilo-HiControl 1-EK version with an electrical cable and integrated socket shortens the installation time by direct connection to the pump and the power supply. Wilo-HiControl 1 can be mounted on surface pumps or connected to submersible motor pumps for private water supply. Features Easy installation Due to its particularly compact design, suitable for many installation sites High operational reliability due to electronic fault message Protection of connected pumps by integrated dry-running protection Easy operation due to clear operating status display and manometer No additional diaphragm pressure tank required Perfect corrosion protection due to stainless materials Ready for connection for fastest installation. In-line design with inlet and outlet in vertical axis and uniform threaded connections, suitable for direct connection to the pump housing or for wall mounting using a wall bracket (accessory). Note The HiControl 1 may only be installed in a vertical position with the outlet at the top! Scope of delivery HiControl 1 EK incl. 1.5 m connection cable with intermediate plug EK Cable ties for quick and secure installation of ready-to-plug pump units Technical data Phases: 1 Rated voltage: 220/230/240 V Mains frequency: 50, 60 Hz Min. rated current: 2 A Max. rated current per pump: 10 A Protection class: IP65 Max. medium temperature: 50 °C Max. ambient temperature: 50 °C Flow rate max.: 8 m³/h Inlet connection: G 1 Outlet connection: G 1 Housing material: PA6 Net weight approx.: 1.3 kg Make: Wilo Item no.: 4190895