• Free shipping on orders over €5000 in AT

  • Consulting and Planning

  • Fast shipping

  • Current Daily Rates

WILO  Art.Nr: 15472070689099

WILO Wilo DrainLift Wastewater Lifting Unit SANI-S.11/T540/1-CEE – 6098871

Regular price
Regular price € 3.046,72 inkl. USt.
€ 2.538,93 exkl. USt.
Verfügbarkeit wird geladen …
WhatsApp Sofortberatung Jetzt online Persönliche Beratung direkt vom Fachmann – Antwort meist in wenigen Minuten.

Compact, ready-to-connect, fully submersible single-pump lifting unit for pumping wastewater containing faeces.Pumped MediaFor the collection and pumping of these media in commercial areas:Wastewater containing faecesWastewater without faecesWastewater pumping according to EN 12050The lifting unit complies with DIN EN 12050-1.ConstructionGas and watertight collecting tank:Sloping bottomInspection opening with transparent lidFreely selectable inlets in the areas shownLevel measurement with 4 – 20 mA level sensorWastewater pump:Direct mounting on the collecting tankMotor with surface cooling (air cooling) and thermal motor monitoringPressure connection with non-return valve and attached inspection openingPre-wired control unit for automatic operation:Collective fault signal via potential-free contactIntegrated and mains-independent alarmAdjustable run-on time1.5 m connection cable with pre-assembled plugScope of deliveryLifting unit with control unit and connection cable with plugFlange connection from DN 80, PN 10 to DN/OD 110Flexible sleeve DN/OD 110 for drain connectionHT double socket DN/OD 50 for ventilation connectionHT double socket DN/OD 50 for emptying connectionInlet set with hole saw 124 mm (5 inches) and seal for HT pipe DN/OD 110Floor mounting setSound insulation mat9 V batteryInstallation and operating instructionsOperating dataFluid media: WaterPermissible application rangeMedia temperature: 3 °CMax. media temperature, short-term up to 5 min.: 65 °CAmbient temperature: 3 °CMaximum operating pressure: 1.2 barMax. permissible pressure in the pressure line: 1.5 barProduct dataGross volume of the tank: 47 lUsable volume at 180 mm inlet height: 25.00 lUsable volume at 250 mm inlet height: 32.00 lSound pressure level: 70 dBOperating mode (submerged): S3-10%Height: 511 mmLength: 490 mmWidth: 490 mmDiagonal dimension: 630 mmFree spherical passage of the hydraulics: 44 mmMotor dataMains connection: 3~400 V, 50 HzVoltage tolerance: ±10 %Motor rated power: 750 WRated speed: 2840 rpmRated current: 1.9 AInsulation class: FProtection class motor: IP68Start-up type: Direct (DOL)Max. switching frequency: 60Motor protection: BimetalCableLength of connection cable: 4 mCable type: H07RN-FCable cross-section: 6G1 mm²Mains plug: CEE 16A, 3P+N+PE, 6hMaterialsTank: PEPump housing: PP-GF30Impeller: PP-GF30Shaft: Stainless steelSeal material: NBRMotor housing: Stainless steelInstallation dimensionsSuction-side pipe connection: DN/OD 110 (HT pipe), DN/OD 160 (HT pipe)Pressure-side pipe connection: DN 80Ventilation connection: DN/OD 50 (HT pipe)Ordering informationMake: WiloProduct designation: DrainLift SANI-S.11/T540/1-CEENet weight approx.: 28 kgItem number: 6098871

Installation anfragen
Montage • Elektro • Inbetriebnahme
Wir bieten die Installation deiner Photovoltaikanlage durch unser Team sowie durch ausgewählte Partnerbetriebe an. Gemeinsam sorgen wir für eine fachgerechte Montage, Elektroinstallation und zuverlässige Inbetriebnahme.
Installation anfragen

Technische Parameter

Produkteigenschaften ETIM

Ursprungsland
DE
Zolltarifnummer
84137021
eClass
22361311
eClass Bezeichnung
Haltegriff (Bad)
ETIM-Klasse
Abwasserhebeanlage
Mit Schneidwerk
Nein
Werkstoff des Pumpengehäuses
Polypropylen (PP)
Werkstoffgüte des Pumpengehäuses
PP-GF
Werkstoff des Gebläserads/Laufrads
Polypropylen (PP)
Werkstoffgüte Gebläserad/Laufrad
PP-GF
Werkstoff des Behälters
sonstige
Werkstoffgüte des Behälters
PE-40
Behältervolumen
47 l
Anzahl der Pumpen
1
Volumenstrom (BEP)
15.19 m³/h
Förderhöhe bei Volumenstrom (BEP)
67.61 kPa
Max. Volumenstrom
28.8 m³/h
Max. Förderhöhe
11.03 m
Max. Arbeitsdruck
1.2 bar
Elektrischer Anschluss
Anschlusskabel mit Stecker
Bemessungsspannung
400 - 400 V
Anzahl der Phasen
3
Frequenz
50 Hz
Nennstrom
1.9 A
Aufgenommene Motorleistung (P1) pro Motor
1.03 kW
Motorausgangsleistung (P2)
0.75 kW
Nennbetriebsart
S3 10 %
Isolationsklasse nach IEC
F
Drehzahl
2840 1/min
Mediumtemperatur (Dauerbetrieb)
3 - 40 °C
Umgebungstemperatur
3 - 40 °C
Anschluss Einlassseite
sonstige
Anschluss Auslassseite
Flansch
Nenndurchmesser, Anschluss Auslassseite
DN 80
Rohraußendurchmesser, Anschluss Auslassseite
80 mm
Druckstufe Flanschanschluss Auslassseite
PN 10
Anschlussstandard Auslassseite
EN 1092-2
Schutzart (IP)
IP68
Breite
490 mm
Tiefe
490 mm
Höhe
511 mm
Max. Partikelgröße
44 mm