WILO Wilo DrainLift MINI3-XS/WC-EF Wastewater Lifting Unit, 230 V, 700 W – 6095128

Compact and ready-to-connect lifting unit for draining washbasins, showers, and WCs.Pumping mediumFor collecting and pumping in domestic areas of:Wastewater containing faecesWastewater pumping according to EN 12050The wastewater lifting unit complies with the requirements of EN 12050-3.For systems according to EN 12050-3, observe the following points:All connected drainage fixtures are installed in the same room.Another toilet is present above the backflow level.ConstructionCompact, ready-to-connect and fully submersible lifting unit with a submersible motor pump. The submersible motor pump is equipped with a rotating cutter. The cutter reliably macerates faeces in the wastewater. Level detection is carried out with a vertical float switch. Ventilation is integrated in the lid and equipped with an activated carbon filter.Up to five connections are available:1x inlet 40 mm (DN 40), without non-return valve, routed upwards, factory-sealed.2x inlets 40/50 mm (DN 40/50), with non-return valve, routed horizontally to the left and right, factory-open.1x toilet connection 110 mm (DN 110), routed to the front, factory-open. − If required, the WC connection can be routed horizontally to the right. The associated opening is factory-sealed.1x pressure connection 32/40 mm (DN 32/40), with non-return valve, routed upwards, factory-open.Scope of delivery1x sleeve for HT pipe DN 32/40 (32/40 mm)2x hose clamps 32-50 mm1x sleeve for HT pipe DN 110 (110 mm)1x clamping ring1x hose clamp 110-130 mm2x inlet connections DN 50 (50 mm)2x sleeves for HT pipe DN 40/50 (40/50 mm)2x non-return valves2x pipe clamps 50-70 mm2x hose clamps 32-50 mm2x sealing plugs6x O-ringsFloor mounting (buoyancy protection): 2x mounting brackets with screws and dowelsInstallation and operating instructionsOperating dataPumping medium: Water, wastewater - without faeces, wastewater - containing faecesPermissible application areaMedium temperature: 3 °CMax. medium temperature, short-term up to 5 min.: 75 °CAmbient temperature: 3 °CMaximum operating pressure: 0.9 barMax. switching volume: 2.2 lMotor dataMains connection: 1~230 V, 50 HzVoltage tolerance: ±10 %Motor rated power: 420 WRated speed: 2800 rpmRated current: 3.4 AInsulation class: FMotor protection class: IP68Max. switching frequency: 20 MaterialsContainer: ABSPump housing: PP-GF20Impeller: PP-GF20Installation dimensionsSuction-side pipe connection: DN/OD 40 (HT pipe), DN/OD 50 (HT pipe)Pressure-side pipe connection: DN/OD 32 (HT pipe), DN/OD 40 (HT pipe)Ordering informationMake: WiloNet weight approx.: 7.5 kgArticle number: 6095128