K2 SYSTEMS Mounting set corrugated roof vertical – 5 solar modules

Complete K2 mounting set for the vertical installation of 5 solar modules on corrugated fiber cement roofs. The fastening is done using K2 hanger bolts M10x180 with fiber cement sealing directly into the wooden substructure; K2 Climber 36/50 connect the rails. Black anodized end and mid clamps provide a uniform appearance.

Scope of delivery

• 7× K2 SingleRail 36, 3.65 m
• 10× K2 SingleRail Hanger Bolt M10x180 with Fiber Cement Gasket
• 10× K2 Climber 36/50 Set
• 4× K2 Universal End Clamp OneEnd 25–40 mm, black anodized
• 8× K2 Clamp MC 25-40 mm, black anodized – 2004540
• 14× K2 EndCap for SingleRail 36
• 14× K2 BlackCover SingleRail 36
• 2× K2 SingleRail 36/50 Rail Connector
• 5× K2 Terragrif K2SZ – 2001881
• 5× K2 Cable Tie with Mounting Option – 2002870
• 2× K2 Lightning Protection Clamp 8 mm Set – 2004922

Note on design: The set is based on a rafter spacing of 65 cm, story height 3, wind load zone 2, and a module length of 1762 mm, and is not suitable for large-format modules. Every roof must be statically inspected. In case of different roof conditions or wind load zones, additional components are required.