K2 SYSTEMS Mounting Kit Corrugated Roof Vertical – 4 Solar Modules

Complete K2 mounting set for the vertical installation of 4 solar modules on corrugated fiber cement roofs. The mounting is done with K2 hanger bolts M10x180 with fiber cement seals directly into the wooden substructure, and the rails are connected with K2 Climber 36/50. Black anodized end and mid clamps create a harmonious overall appearance.

Scope of delivery

• 2× K2 SingleRail 36, 3.65 m
• 2× K2 SingleRail 36, 4.80 m
• 8× K2 SingleRail Hanger Bolt M10x180 with Fiber Cement Seal
• 8× K2 Climber 36/50 Set
• 4× K2 Universal End Clamp OneEnd 25–40 mm, black anodized
• 6× K2 Clamp MC 25-40 mm, black anodized – 2004540
• 12× K2 EndCap for SingleRail 36
• 12× K2 BlackCover SingleRail 36
• 4× K2 Terragrip K2SZ – 2001881
• 4× K2 Cable Tie with Mounting Option – 2002870
• 2× K2 Lightning Protection Clamp 8 mm Set – 2004922

Note on design: This set is based on a rafter spacing of 65 cm, building height of 3, wind load zone 2, and a module length of 1762 mm, and is not suitable for large-format modules. Every roof must be statically inspected. Additional components are required for different roof conditions or wind load zones.