K2 SYSTEMS Mounting Set Corrugated Roof Horizontal – 2 Solar Modules

Complete K2 mounting set for the horizontal mounting of 2 solar modules on corrugated fiber cement roofs. The fastening is done with K2 hanger bolts M10x180 with fiber cement seal directly into the timber substructure. K2 SingleRail 36 aluminum profiles and black anodized end clamps provide a stable and visually discreet fastening.

Scope of delivery

• 2× K2 SingleRail 36, 3.65 m
• 8× K2 SingleRail hanger bolt M10x180 with fiber cement seal
• 8× K2 Universal End Clamp OneEnd 25–40 mm, black anodized
• 8× K2 EndCap for SingleRail 36
• 8× K2 BlackCover SingleRail 36
• 2× K2 Terragrif K2SZ – 2001881
• 2× K2 Cable tie with attachment option – 2002870
• 2× K2 Lightning protection clamp 8 mm set – 2004922

Note on design: This set is based on a rafter spacing of 65 cm, floor height 3, wind load zone 2, and a module length of 1762 mm, and is not suitable for large-format modules. Every roof must be statically checked. For different roof conditions or wind load zones, additional components are required.