K2 SYSTEMS Mounting Kit Trapezoidal Sheet Metal – 6 Solar Modules

Complete K2 mounting set for the installation of 6 solar modules on trapezoidal sheet metal roofs. The fastening is done using K2 BasicClips, which are screwed directly onto the high bead of the trapezoidal sheet metal with thread-forming screws including a sealing washer. The rail sections are assembled from two BasicRail lengths with rail connectors and guided slidingly into the clips.

Scope of delivery

• 23× K2 BasicClip pitched roof trapezoidal sheet metal (1001164)
• 46× K2 Thread-forming screw with sealing washer 6×38 mm (2003525)
• 10× K2 Clamp MC 25-40 mm, black anodized – 2004540
• 4× K2 Universal End Clamp OneEnd 25–40 mm, black anodized (2004545)
• 2× K2 BasicRail 22, 4.80 m (2004278)
• 2× K2 BasicRail 22, 2.40 m (2004276)
• 2× K2 BasicLock 22 Set (1003558)
• 2× K2 Rail Connector Set BasicRail (1003571)
• 6× K2 Terragrif K2SZ (2001881)
• 6× K2 Cable Tie with attachment option (2002870)
• 2× K2 Lightning Protection Clamp 8 mm Set (2004922)

Note on design: The set is based on building height 3, wind load zone 2, and a module length of 1762 mm and is not suitable for large-format modules. Each roof must be statically checked. In case of deviating roof conditions or wind load zone, additional components are required.