ELTAKO AC meter - 28032615

Maximum current 32A, standby loss only 0.4 watts. Modular device for mounting on DIN-EN 60715 TH35 mounting rail. 1 module = 18mm wide, 58mm deep. Accuracy class B (1%). With S0 interface. This AC meter measures active energy based on the current flowing between the input and output. The self-consumption of only max. 0.4 watts active power is not measured or displayed. Like all meters without MID conformity declaration in Europe, not approved for monetary electricity billing. Every 30 seconds, the display switches for 5 seconds from the accumulated active energy in kWh to the instantaneous consumption in watts. 1 external conductor with a current of up to 32A can be connected. If a load of more than 50% is expected, a ventilation clearance of 1/2 module must be maintained from adjacent devices. If necessary, use the DS12 spacer. The starting current is 20mA. The display can only be read with power supply. However, consumption is non-volatilely stored and is immediately displayed again after a power failure. Two N-terminals for safe cross-wiring of multiple meters. The digital display has 7 digits. Up to 99999.99 kWh, two decimal places are displayed. From 100000.0 kWh, only one. Power consumption is indicated by a bar flashing 1000 times per kWh on the display. Error message: In case of a connection error, an LED on the display flashes.