ELTAKO Latching Relay 230V+UC. 1 N/O contact, not floating, 10A/250VAC – 61100001

1 NO contact, not isolated, 10A/250V AC, 230V LED lamps up to 600W, incandescent lamps 2000W, switch-off delay with early warning and push-button continuous light can be switched on. Stand-by loss only 0.7 watts. For flush mounting. 45mm long, 45mm wide, 18mm deep. Contact switching in zero crossing to protect contacts and lamps. State-of-the-art hybrid technology combines the advantages of wear-free electronic control with the high performance of special relays. Due to the use of a bistable relay, there is no coil power loss and no heating in the switched-on state. After installation, wait for the automatic short synchronization before connecting the switched load to the mains. Control voltage 230V, additionally with galvanically isolated universal control voltage 8..230V UC. Supply and switching voltage 230V. Very low switching noise. Time setting up to 120 minutes in ESV function. Pushbuttons with a glow lamp current of up to 50mA can be connected to the control input. In the event of a power supply failure, the unit switches off in a defined manner. If the delay time is set to minimum in the ESV function, the switch-off delay is deactivated, resulting in the normal impulse switch function ES. Can be switched to the switching relay function ER. In the ER function, no glow lamp current is permitted and only control input A1-A2 should be used. In the ER function, also suitable for feedback with the switching voltage of a dimmer switch. When the switch-off pre-warning is activated, the lighting flickers for approx. 30 seconds before the time expires and a total of 3 times at shortening intervals. With the push-button continuous light activated, pressing for longer than 1 second switches to continuous light, which is automatically switched off after 2 hours or can be switched off by pressing for longer than 2 seconds. If the switch-off pre-warning and push-button continuous light are activated, the switch-off pre-warning only occurs after the continuous light has been switched off.