ELTAKO Switching and Control Relay UC. 1 Changeover Contact, Potential-free 16A/250V – 22001601

1 NO contact, potential-free. N/O contact: 16A/250V AC, 230V LED lamps up to 200W, incandescent lamps up to 2000W. N/C contact: 10A/250V AC, 230V LED lamps up to 200W, incandescent lamps up to 2000W. No standby loss. Modular installation device for mounting on DIN-EN 60715 TH35 mounting rail. 1 module = 18mm wide, 58mm deep. State-of-the-art hybrid technology combines the advantages of wear-free electronic control with the high performance of special relays. Universal control voltage 12..230V UC. Low switching noise. Control indicator with LED. Integrated freewheeling/quenching diode (A1 =+, A2 =-). Safe isolation according to VDE 0106, part 101, therefore also usable as a coupling relay. Due to the use of a bistable relay, there is no coil power loss and no heating in the switched-on state. The relay contact can be open or closed during commissioning and synchronizes at the first operation. This relay is not suitable for feedback with the switching voltage of a dimmer switch. For this, only use relays ESR12DDX-UC, ESR12NP-230V+UC or ESR61NP-230V+UC. The electronics have no own power supply and therefore no standby loss. Only when the control contact is closed is the microcontroller activated, which switches the bistable relay in the correct direction. When the control contact is opened or the control voltage drops, it switches back.