ELTAKO Three-Phase Meter, MID 2019 – 28380015

Maximum current 3x80 A, standby loss only 0.5 watts per path. Modular device for mounting on DIN-EN 60715 TH35 top-hat rail. 4 division units = 70mm wide, 58mm deep. Accuracy class B (1%). With S0 interface. The direct-metering three-phase meter measures active energy based on the currents flowing between the inputs and outputs. The meter's own consumption of only a maximum of 0.5 watts of active power per path is not measured or displayed. 1, 2 or 3 phase conductors with currents up to 80A can be connected. The starting current is 40mA. The N connection must be present. The 7-segment LC display can be read twice within two weeks even without a power supply. Power consumption is indicated by a bar flashing 100 times per kWh on the display. Also available as a 2-tariff meter as standard: By applying 230V to terminals E1/E2, the meter switches to a second tariff. To the right of the display are the MODE and SELECT buttons, which are used to navigate the menu according to the operating instructions. First, the backlight switches on. Then, the total active energy per tariff, the active energy of the resettable memory RS1 or RS2, as well as the instantaneous values of power, voltage, and current per phase conductor can be displayed. Error message (false): If a phase conductor is missing or the current direction is incorrect, "false" and the corresponding phase conductor are displayed.