ELTAKO Three-Phase Meter – 28380615

Maximum current 3x80A, standby loss only 0.5 watts per path. Modular device for mounting on DIN-EN 60715 TH35 mounting rail. 4 division units = 70mm wide, 58mm deep. Accuracy class B (1%). With S0 interface. The direct-measuring three-phase meter measures active energy based on the currents flowing between the inputs and outputs. The meter's own consumption of only a maximum of 0.5 watts active power per path is not measured and not displayed. Like all meters without MID conformity declaration in Europe, not approved for monetary electricity billing. 1, 2 or 3 live conductors with currents up to 80 A can be connected. The starting current is 40mA. The N-connection must be present. The 7-segment LC display can also be read twice within two weeks without a power supply. Power consumption is indicated by a bar flashing 100 times per kWh on the display. Also available as a 2-tariff meter as standard: Applying 230V to terminals E1/E2 switches to a second tariff. To the right of the display are the MODE and SELECT buttons, which are used to navigate through the menu according to the operating instructions. First, the backlight switches on. Then the total active energy per tariff, the active energy of the resettable memory RS1 or RS2, and the instantaneous values for power, voltage, and current per live conductor can be displayed. Error message (false): If a live conductor is missing or the current direction is incorrect, "false" and the corresponding live conductor are shown on the display.