ELTAKO Digitally adjustable multifunction time relay with display and Bluetooth, 1 changeover contact 10A - 23001003

Digitally adjustable multi-function time relay with display, Bluetooth, ELTAKO Connect app and 18 functions. 1 N/O contact, potential-free, 10A/250V AC and DX, 230V LED lamps up to 200W, incandescent lamps 2000W. With display illumination. Stand-by loss only 0.1-0.3 watts. Modular device for mounting on DIN-EN 60715 TH35 mounting rail. 1 module unit = 18mm wide, 58mm deep. With the patented ELTAKO duplex technology (DX), the normally potential-free contacts can still switch in zero crossing when switching 230V AC voltage 50Hz, thereby drastically reducing wear. To do this, simply connect the N conductor to terminal (N) and L to 15(L). This results in an additional stand-by loss of only 0.1 watts. Universal control voltage 12..230V UC. Supply voltage is the same as the control voltage. Both the function and the times are entered by pressing a button and digitally displayed on an LCD display. Only two buttons need to be operated for this. When setting the time, all values can be entered within the pre-selected time frames (0.1-9.9 or 1-99 seconds, minutes or hours). The longest time is 99 hours. 600 time settings are possible. The entered time(s) is (are) continuously displayed digitally. Functions: RV = release delay. AV = ON delay. AV+ = Additive ON delay. TI = clock generator starting with pulse. TP = clock generator starting with pause. IA = pulse-controlled ON delay (e.g., automatic door opener). IF = pulse shaper. EW = ON wipe. AW = OFF wipe. EAW = ON and OFF wipe. ARV = ON and OFF delay. ARV+ = Additive ON and OFF delay. ES = impulse switch. SRV = impulse switch with release delay. ESV = impulse switch with release delay and OFF pre-warning. ER = relay. ON = permanent ON. OFF = permanent OFF. For functions TI, TP, IA, EAW, ARV and ARV+, a different second time can be entered, even with a different time frame. The time relay is set either via Bluetooth with the app or with the MODE and SET buttons. Pressing MODE or SET for the first time switches on the display illumination. 20 seconds after the last MODE or SET operation, the program automatically returns to the normal display and the display illumination is switched off. Connect time relay with the app: Press SET, BLE (Bluetooth) and the ID of the time relay appear on the display. The connection can now be established with the app (delivery state PIN 123123). Scan the QR code on the operating instructions, the app guides you through the teaching process. After the connection to the app has been established, BLE+ appears on the display. The MODE and SET buttons are now locked. After 20 minutes without interaction with the time relay, the connection is automatically disconnected. Change PIN: The PIN for the Bluetooth connection can be changed in the app, under the Device PIN entry. Bluetooth reset (delete possibly changed PIN): The connection to the app must be disconnected. Press MODE and SET simultaneously for 2 seconds, RES flashes on the display. Now press SET for 2 seconds, bLE appears on the display. If confirmed with SET, the BLE reset is performed, the PIN is deleted and the delivery state is restored. Set time relay with MODE and SET buttons: By pressing the MODE button, the LCD element to be changed is selected. The currently accessed element flashes. By pressing the SET button, the accessed element is changed. This can be the function, the time frame, time T1 or time T2 (only for TI, TP, IA, EAW, ARV and ARV+). Each input is terminated with the MODE button. After setting the time with MODE, no element flashes anymore - the time relay is ready for operation. Safety in case of power failure: The set parameters are stored in an EEPROM and are therefore immediately available again after a power failure.