ELTAKO Outdoor Socket Timer with Bluetooth, 1 N/O Contact 16A – 30000660

1-channel timer with Bluetooth and the ELTAKO Connect app. 1 NO contact, not potential-free, 16A/250V AC, 230V LED lamps and ESL up to 400W, incandescent lamps 2300W. 116x56x46mm (dimensions without plug), black. Suitable for indoor and outdoor use, IP44 (splash-proof). With astro function. Stand-by loss only 0.3 watts. Adapter plug for German Schuko socket. With increased touch protection. Supply and switching voltage 230V. Contact switching at zero crossing. Bistable relay, so there is no coil power loss and no heating in the switched-on state. Up to 60 timer memory locations are freely distributed across the channel. With date and automatic daylight saving time/winter time changeover. Power reserve without battery approx. 7 days. Each memory location can be assigned either with the astro function (automatic switching according to sunrise or sunset) or with the switch-on and switch-off time. The switch-on or switch-off time Astro can be shifted by up to ± 2 hours. In addition, a time shift of up to ± 2 hours, influenced by the solstices, can be entered. The timer is set via Bluetooth with the app. Connect timer to the app: Press the button on the front for 5 seconds, the blue LED flashes. The connection with the app can now be established (delivery state PIN 123123). The flashing of the blue LED signals coupling readiness; this ends automatically after 3 minutes, but can be manually terminated by pressing a button >5 seconds. Scan the QR code on the operating instructions; the app guides you through the learning process. After the connection to the app has been established, the blue LED lights up continuously. If the connection is not disconnected via the app, it is automatically disconnected after 20 minutes without interaction with the app. After disconnecting the connection via the app, the timer again signals its coupling readiness and the blue LED flashes. Change PIN: The PIN for the Bluetooth connection can be changed in the app, under the "Device PIN" entry. Bluetooth reset (delete possibly changed PIN): Briefly tap the button on the front 8 times or unplug and plug in the adapter plug 8 times within 40 seconds. The blue LED flashes. Setting the timer via the ELTAKO Connect app: Edit programs: Create, edit and activate/deactivate time and astro programs. Channel configuration: Selection between AUTO, ON or OFF function. Random mode: When random mode is switched on, all switching times of all channels are randomly shifted by up to 15 minutes. Switch-on times earlier and switch-off times later. Solstice time offset: Setting a time shift of up to ± 2 hours at the summer solstice and at the winter solstice. Date and time: Manual or automatic setting of date, time, time zone and daylight saving time/winter time possible. Location: Manual or automatic entry of location possible. Bluetooth: Permanent visibility can be activated. By activating permanent visibility, Bluetooth on the timer remains active and does not have to be manually activated before establishing a connection. Factory settings: Selection between deleting all programs, resetting Bluetooth settings and resetting to factory settings. Operate timer with the button on the front: Manual operation: A short press of the button can always manually switch on and off. Switching the AUTO function on and off: By pressing a button >2 seconds but <5 seconds, the AUTO function can be switched on and off. If the button is pressed for 2 seconds, the green LED lights up briefly; if it is then released, the green LED signals whether the AUTO function is on or off. If the green LED lights up for 0.3 seconds, the AUTO function is deactivated; set time and astro programs are not executed. If the green LED lights up for 2 seconds, the AUTO function is activated; the timer switches according to the time and astro programs.