ELTAKO 2-channel timer with display and Bluetooth – 23002903

2-channel time switch with display and Bluetooth with the ELTAKO Connect app. 1+1 potential-free NO contact 10A/250V AC, with DX technology. With display illumination and astro function. Stand-by loss only 0.1-0.3 watts. Supply voltage 12..230V UC. Central ON and central OFF control inputs for 8..230V UC, galvanically isolated from the supply voltage and switching voltage. Modular device for mounting on DIN-EN 60715 TH35 mounting rail. 2 division units = 36mm wide, 58mm deep. With the patented ELTAKO Duplex technology (DX), the normally potential-free contacts can still switch at zero crossing when switching 230V/50Hz AC voltage, thus drastically reducing wear. To do this, simply connect the N conductor to the respective terminal (N) and L to 1(L) and/or 4(L). This results in an additional standby loss of only 0.1 watts each. Up to 60 time switch memory locations are freely distributed among the channels. With date and automatic summer/winter time changeover. Power reserve without battery approx. 7 days. Each memory location can be assigned either with the astro function (automatic switching according to sunrise or sunset), the switch-on and switch-off time, or a pulse switching time (default 2 seconds). The switch-on or switch-off time Astro can be shifted by up to ± 2 hours. In addition, a time shift of up to ± 2 hours influenced by the solstices can be entered. Central control ON (terminals +E1/-E2) or OFF (terminals +F1/-E2) with priority in ZEA operation (automatic with central control). The time switch is set either via Bluetooth with the app or with the MODE and SET buttons. A button lock is possible. Pressing MODE or SET for the 1st time switches on the display illumination. 20 seconds after the last MODE or SET operation, the program automatically returns to the normal display and the display illumination is switched off. Connect time switch to the app: Press SET, BLE (Bluetooth) and the ID of the time switch appear on the display. Now the connection to the app can be established (default PIN 123123). Scan the QR code on the operating instructions, the app guides you through the learning process. After the connection to the app has been established, BLE+ appears on the display. The MODE and SET buttons are now locked. After 20 minutes without interaction with the time switch, the connection is automatically disconnected. Change PIN: The PIN for the Bluetooth connection can be changed in the app, under the Device PIN entry. Bluetooth reset (delete possibly changed PIN): The connection to the app must be disconnected. Press MODE and SET simultaneously for 2 seconds, RES flashes on the display. Now press SET for 2 seconds, bLE appears on the display. If confirmed with SET, the BLE reset is performed, the PIN is deleted and the factory settings are restored. Set time switch with MODE and SET buttons: Set language: After each power supply is applied, the language can be selected with SET within 10 seconds and confirmed with MODE. D = German, GB = English, F = French, IT = Italian and ES = Spanish. Then the normal display appears: weekday, time, day and month. Fast run: For the following settings, the numbers run up quickly when the enter key is pressed longer. Releasing and pressing again longer changes the direction. Set time: Press MODE and then search for the TIME function with SET at PRG and select it with MODE. At S, select the hour with SET and confirm with MODE. Proceed similarly for M as minute. Set date: Press MODE and then search for the DATE function with SET at PRG and select it with MODE. At J, select the year with SET and confirm with MODE. Proceed similarly for M as month and T as day. As the last setting in the sequence, the weekday flashes. This can be set with SET and confirmed with MODE. Further settings such as location for astro function, manual switching ON or OFF, summer/winter time changeover, random mode, button lock and entering the time switch programs according to the operating instructions.