ELTAKO 1-channel time switch with potential-free contact, Bluetooth and ELTAKO Connect app – 30062006

1-channel time switch with potential-free contact, Bluetooth and ELTAKO Connect app. 1 NO contact potential-free 10 A/250 V AC, 230 V LED lamps and ESL up to 200 W, incandescent lamps 2000 W. With astro function. Stand-by loss only 0.3 watts. For flush mounting. 49 x 51 mm, 20 mm deep. The connection terminals are plug-in terminals for conductor cross-sections from 0.2 mm² to 2.5 mm. Supply and control voltage 12-230V UC. Bistable relay, which means there is no coil power loss or heating when switched on. Up to 60 memory locations for programming switching times. With date and automatic daylight saving time/standard time changeover. Power reserve without battery approx. 7 days. When voltage returns, the time switch resumes the programs. Each memory location can be assigned either the astro function (automatic switching according to sunrise or sunset) or the switch-on and switch-off time, one-time program execution configurable. The switch-on or switch-off time astro can be shifted by up to ± 2 hours. In addition, a time shift of up to ± 2 hours influenced by the solstices can be entered. The time switch is set via Bluetooth with the ELTAKO Connect app. The QR code in the operating instructions leads to the download of the app, with which the device is configured. Pairing mode: Automatic for 3 minutes after applying voltage or manually via the local button (press for 5 seconds). A short switching on and off of the load signals pairing readiness. If the connection is not disconnected via the app, it is automatically disconnected after 20 minutes without communication with the app. After the connection with the app has been disconnected, the time switch is ready for pairing again for 3 minutes, but can be manually ended via the local button (press for 5 seconds). Switching the load on and off twice signals the end of pairing readiness. Change PIN: The PIN for the Bluetooth connection can be changed in the app, under the device PIN entry. Bluetooth reset (delete possibly changed PIN): Briefly tap the local button 8 times or switch the supply voltage on and off 8 times. Setting the time switch via the ELTAKO Connect app: Edit programs: Create, edit and activate/deactivate time and astro programs, as well as the option to execute a program only once. Channel configuration: Selection between AUTO, On or Off function. The time switch only switches according to the time and astro programs when the AUTO function is activated. Random mode: When random mode is switched on, all switching times are randomly shifted by up to 15 minutes. Switch-on times are shifted forward and switch-off times backward. Time offset solstice: Setting a time shift of up to ± 2 hours at the summer solstice and at the winter solstice. Date and time: Date, time, time zone and summer/winter time can be set manually or automatically determined and set by the app. Location: The location can be entered manually or determined and set by the app. Bluetooth: Selection between 3 Bluetooth settings. 3min-On: After applying voltage, the time switch is ready for pairing for 3 minutes. Manual-On: Pairing readiness can only be activated for 3 minutes via the local button. Permanent-On: Bluetooth remains permanently active. Factory settings: Selection between deleting all programs, resetting Bluetooth settings and resetting to factory settings. Operate time switch with the local button: Manual control: By briefly pressing a button, it can always be switched on and off manually.