Cable pulling device Runpo5 digital meter counter with box, triple twisted Ø5.5mm 30m – 10203

The RP5 - RUNPOTEC Polyester Ø 5.5 mm is a cable pulling device including a digital meter counter (for determining the length of pipes/cables or for creating cable lists). The triple-twisted special plastic tape Ø 5.5 mm has an even better pushing effect than the fiberglass rod Ø 3 mm and the friction resistance is only half as great due to its punctual contact. The patented RG7 - guiding tip with twist compensation Ø 5.5 mm (pressed at the beginning and end of the tape) allows overcoming the tightest radii (bending radius 15 mm). The RP5 - RUNPOTEC Polyester Ø 5.5 mm is stored in a robust, construction site-suitable storage box with an ergonomic carrying handle. This is equipped with the new anti-recoil mechanism, which prevents the cable pulling tape from accidentally slipping back. The unit of measurement of the meter counter can be switched from metric (m) to imperial (ft). The total breaking load of an incredible 270 kg refers to the entire pulling system. Laborious and time-consuming repair work is eliminated, as this cable pulling system is virtually break-free. The RP5 is available in lengths of 20 m and 30 m. The RP5 replacement tape 40 m cannot be stored in the box. Optimal area of application: for internal pipe diameters from 9 - 32 mm APPLICATION VIDEO: You can watch a short, very informative application video by scanning the QR code or on www.runpotec.com. Scope of delivery: 1 x RP5 cable pulling system Ø 5.5 mm incl. meter counter in plastic box, length 30 m, incl. 2 x RG7 - guiding tip with twist compensation (pressed on both sides)