GF3 - Fiberglass Rod Ø 3 mm - 20 m - 10192

GF3 - Cable pulling device incl. digital meter counter, fiberglass rod Ø 3 mm with anti-kink end sleeve (internal thread RTG Ø 6 mm) and patented RG7 guide tip with twist compensation (2 x external thread RTG Ø 6 mm). Stored in a shock-resistant plastic box. The box is splash-proof and dust-protected, extremely shock-resistant and therefore ideally suited for construction sites. The GF3 - plastic box can be opened with just one screw for service work. The anti-rollback device prevents the fiberglass rod from unintentionally sliding back into the box. Furthermore, the box has an ergonomic carrying handle and an anti-slip coating. A 16-piece accessory set is included in the scope of delivery. The newly developed anti-kink technology enables bending radii of up to R = 38 mm to be overcome. The stated total breaking load of 130 kg refers to the fiberglass rod including anti-kink sleeves. Excellent for use in combination with the RC2 or RC3 inspection camera. The included cable pulling loop (Ø 14 mm outer) with built-in twist compensation and protective cap can be used for one or more cables up to a cable diameter of Ø 12 mm. Quick attachment of the cables to the loop. Any plugs are protected from strain by tension on the cable. Optimal area of application: for internal pipe diameters 9 - 45 mm APPLICATION VIDEO: A short, very informative application video can be viewed by scanning the QR code or at www.runpotec.com. Scope of delivery: 1 x GF3 incl. meter counter in plastic box, length 20 m, anti-kink end sleeve on both sides (start/end), content of accessory box: 1 x RG7 guide tip with twist compensation, 1 x anti-kink end sleeve RTG Ø 6 mm, 1 x pulling aid, 1 x special adhesive 3 g, 1 x cable pulling loop (Ø 14 mm outer), 6 x adhesive sleeves Ø 3 mm, 3 x pulling eyes Ø 7 mm, 1 x starting bulb Ø 11 mm, 1 x connecting sleeve, 2 x mounting wrenches, 1 x button cell CR2032