Wireless Relay Actuator, 1 NO Contact 10A – 30100540

Wireless relay actuator 10A/250V AC. 1 NO or NC contact, potential-free. Stand-by loss only 0.4 watts. For flush mounting. 49x51mm, 20mm deep. The terminals are plug-in terminals for conductor cross-sections from 0.2mm² to 2.5mm². With the convenient tip technology, up to 32 wireless buttons and wireless window contacts can be taught in. Bidirectional wireless communication can be activated. Distance control connections/contact 6mm. Supply, switching and control voltage locally 230V. In the event of a power failure, the switching position is maintained. When the power supply is restored, the device is switched off in a defined manner. After installation, wait for the automatic brief synchronization before connecting the switched consumer to the mains. In addition to the wireless control input via an internal antenna, this wireless actuator can also be controlled locally with a conventional 230V control button, if one is mounted in front of it. A glow lamp current is not permitted. When teaching in, the contact function in the idle state can be defined as a normally open or normally closed contact. If the contact closes when at least one window is open, extractor hoods or similar can be enabled or an alarm can be triggered. If the contact opens when at least one window is open, heating or air conditioning units can be switched off. Several wireless window contacts are linked to each other; the last wireless window contact taught in determines the function.