S3000 Uni-LED Dimmer Insert Comfort 2-gang Insert – 540200

System 3000 Universal LED Dimmer Insert Comfort 2-gang. Features: Two independent outputs for two lighting groups. Switching and dimming of incandescent lamps, HV halogen lamps, electronic transformers for halogen or LED lamps, dimmable inductive transformers for halogen or LED lamps, HV-LED or compact fluorescent lamps. Connection of auxiliary units possible. With System 3000 auxiliary insert 3-wire in conjunction with a System 3000 operating top unit 2-gang, both outputs can be operated separately. Automatic or manual setting of the dimming principle suitable for the load (leading or trailing edge). Indication of the set operating mode via LED. Lamp-friendly switching on. Switch-on brightness permanently storable. Switch on with last set brightness or stored switch-on brightness. Minimum brightness adjustable. Electronic short-circuit protection. Electronic overtemperature protection. Operation with and without neutral conductor connection. Push-button dimmer. Combination with RF operating top unit 1-gang / 2-gang for KNX. Sensor channel 1-gang or 2-gang. Local control of the System 3000 insert possible. Radio control of other devices for KNX as a sensor possible. Function selection of the insert: dimming behavior and dimming curve adjustable, soft-on and soft-off function, fading function, staircase function with switch-off pre-warning, scene function (16 scenes), blocking function, time delays. Auxiliary input as an additional operating point for the System 3000 insert or for radio control of other KNX devices as a sensor possible. Notes:. In principle, operation of the dimmer without connecting the neutral conductor is possible, but some LED and CFLi lamps require the neutral conductor connection to avoid flickering. When operating without a neutral conductor, the minimum load for incandescent lamps, HV halogen, Tronic transformers and wound transformers increases to 50 W. Electronic transformers and ballasts for LED lamps can be operated in the dimming method specified by the manufacturer. If the ambient temperature is higher than 25 °C, the connected load must be reduced. Scope of delivery: