DEVIasphalt 300T Outdoor Mat 3.5m² 1050W 400V 0.5x7m – 140F0602
€ 494,87 exkl. USt.
DEVIasphalt 300T Outdoor Mat 3.5m² 1050W 400V 0.5x7m – 140F0602 is backordered and will ship as soon as it is back in stock.
Ready-to-install heating mat with one connecting cable, suitable for embedding in asphalt surfaces. The heating cable meets the requirements of IEC 60800 and EN 62395. With additional protective braiding for use with an RCD. Including a factory-mounted waterproof sleeve and a 30 m cold lead. Voltage: 400 V, rated limit temperature: 90°C, installation temperature: short-term 240°C, deformation resistance 2000 N, tensile strength: 120 N, heating conductor insulation: Teflon, cold lead: 1 x 30 m 2.5 mm², specific heating power: 300 W/m², resistance tolerance: +10% / -5%, minimum installation temperature: 5°C, smallest bending radius: 5 x dA, protection class: IP X7, area: 3.5 m², 0.50 x 7.00 m, 1050 W
€ 494,87 exkl. USt.
DEVIasphalt 300T Outdoor Mat 3.5m² 1050W 400V 0.5x7m – 140F0602 is backordered and will ship as soon as it is back in stock.
Technische Parameter
Technische Parameter
| Thickness | 7 mm | Length of cold leads | 30000 mm |
| Connected load | 1080..1080 W | Resistance | 152.3 Ohm |
| Width | 500 mm | With backing mat | Yes |
| Connection voltage | 400..400 V | Suitable for open-air heating | Yes |
| Model | Heating cable | Fixing of the heating conductor | glued |
| Power | 300 W/m² | Heating conductor load | 30 W/m |
| Number of cold leads | 1 | Suitable for roof heating | No |
| Area | 3.5 m² | Suitable for damp rooms | No |
| Length | 7000 mm | Self-adhesive | No |
| With controller | No | With room thermostat | No |
| With floor temperature sensor | No |