Wireless Universal Actuator with Antenna, 1 Changeover Contact 10A – 30000052

Wireless universal actuator with interchangeable antenna. Latching relay with 1 N/O contact, potential-free 10A/250V AC, incandescent lamps 2000W, with DX technology. Bidirectional. Encrypted wireless. Standby loss only 0.9 watts. A wireless antenna can be connected if required. Modular device for DIN rail mounting. Supply voltage 230V. The wireless universal actuator combines the functions of a wireless antenna module and an actuator as a 1-channel latching relay with DX technology. The switching state is retained in the event of a power supply failure. When the power supply returns, it is definitively switched off. After installation, wait for the automatic brief synchronization before connecting the switched load to the mains. To do this, simply connect the N conductor to terminal (N) and L to 15 (L). This results in an additional standby loss of only 0.1 watts. This wireless actuator can also be locally controlled with a 230V control button at the terminal. In addition, the N conductor must then also be connected to terminal (N). A glow lamp current is not permitted. 230V control button: control current 0.4mA. Maximum parallel capacitance (approx. length) of the control line 0.3 microfarads (1000m). Bidirectional radio and/or a repeater function can be switched on. Every change of state and received central control telegrams are confirmed by a radio telegram in bidirectional radio. This radio telegram can be taught into other actuators, the GFVS software and universal displays.