Wireless pull switch, pure white gloss – 30067545

Wireless pull switch for surface mounting 84x84x24mm or for mounting in the E-Design65 switch system*. With silver and red handle. Generates the energy for radio telegrams, therefore no connection cable and no standby loss. Smart Home sensor. When the handle is pulled and released, a radio telegram is sent to the ELTAKO building radio system. The scope of delivery includes the completely assembled pull switch, a silver handle, a red handle and two screws with dowels. Mounting by screwing: First disassemble the completely assembled pull switch. To do this, remove the screw, unhook the cover and remove the intermediate frame including rocker and transmitter module by loosening the retaining clips at the top and bottom. Attach the mounting plate by screwing. Engage the frame with the suspension cut-outs at the top with the intermediate frame including the transmitter module and rocker, with the rear marking 0 pointing upwards. Hook the cover with the cord passed through into the upper suspension cut-outs of the frame and screw it to the retaining plate at the bottom with the screw. Shorten the cord to the desired length, slide it through the red or silver handle and secure it with a double knot. Position-independent: The pull switch works in any position, even when mounted on the ceiling. Suitable actuators: When operated, the wireless pull switch sends the same radio telegrams as a wireless push button and can therefore be taught into actuators and the controller software in the same way. If it is taught into an actuator as an emergency call switch as "central on", an emergency call can only be acknowledged by another taught-in push button with "central off". The radio module contained in the wireless pull switch can be taught encrypted into all encryptable actuators of series 61, 62 and 71, as well as into the FAM14. For this, the radio push button encryption rocker FTVW is required. Encryptable actuators bear the key pictogram. * If required, please order a 2-gang frame R2E, 3-gang frame R3E or 4-gang frame R4E with suspension cut-outs at the top.