Three-Phase Meter 'Stahl' IR Port 5 A – 2CMA170520R1000
€ 409,06 exkl. USt.
Three-Phase Meter 'Stahl' IR Port 5 A – 2CMA170520R1000 is backordered and will ship as soon as it is back in stock.
Three-phase meter for measuring a three-wire or four-wire three-phase network via a direct connection up to a maximum of 80 A. The following values are displayed on a white backlit display with up to 7 digits: active energy (Class 1), power, currents, voltages (L-L, L-N) and frequency, both per phase and total. Communication can take place via the infrared interface for connecting a KNX module. The energy meter has one output. This can optionally be used as a pulse output for active energy output or as an alarm output. Up to 25 alarm values (thresholds with time delay) can be set here. The meter is calibrated according to MID and approved according to IEC. The installation width is 7 DIN modules.
€ 409,06 exkl. USt.
Three-Phase Meter 'Stahl' IR Port 5 A – 2CMA170520R1000 is backordered and will ship as soon as it is back in stock.
Technische Parameter
Technische Parameter
| Meter type | electronic | Rated current (In) | 80 A |
| Maximum current (Imax) | 80 A | Rated voltage (Un) N-L | 57.7..288 V |
| Rated voltage (Un) L-L | 100..500 V | Frequency | 50..60 Hz |
| Power consumption | 0.807 W | Accuracy class | B |
| Pole type | Four-wire | Design | Direct measurement |
| Energy type | Active power | Suitable for | Reference |
| Tariff design | Single tariff | Tariff control | external |
| Load profile measurement type | No | Reverse lock | Yes |
| Calibrated | Yes | Approval | Measuring Instruments Directive |
| Pulse output | electrical | Pulse type | S0 |
| Pulse rate | 1..999999 Imp/kWh (kvarh) | Display type | digital |
| Mounting type | REG | Width in division units | 7 |
| Width | 123 mm | Depth | 65 mm |
| Height | 26.5 mm | Interface design | other |
| EDL40 signature | No | With blocking code | No |
| Number of digits | 7 | Degree of protection (IP) | IP20 |
| Degree of protection (NEMA) | other |