DEVImat Set 150/Touch (DTIF) 1350W 50x1800cm 9m² – 140F0827

Thin-bed set with touch thermostat, flexible sensor protection tube DN10, brass sensor sleeve, plastic nails, installation instructions. The self-adhesive thin-bed heating mat with one connection cable is pre-assembled and ready for installation and was specially developed for installation in leveling compound or flexible adhesive directly under the floor covering. Due to its low installation height of only 3.2mm, it is ideal for the renovation and modernization of bathrooms, showers, kitchens, etc. This floor tempering system is particularly suitable for subsequent installation in convoluted and/or large rooms, as there is no need to route the second connection back. The Teflon-insulated heating cable with additional protective braiding for use with RCD protection is applied to a plastic mesh. The length of the connection cables is 4.0 m. Cold conductor: 1 x 4m, 1.0mm², voltage: 230 V, rated limit temperature: 120°C, specific heating output: 150 W/m², length load: 11W, insulation: PVDF / FEP, resistance tolerance: +10% / -5%, minimum laying temperature: 5°C, minimum bending radius: 6 x dA, calculated width 50 cm, delivery width: 48 cm, mat height: 3.2 mm, protection class: IPX7, approval: EN 60335-2-96, area 9.0 m², 0.5 x 18.0 m