DEVImat Set 150/Touch (DTIF) 1050W 50x1400cm 7m² – 140F0825

Thin-bed set with touch thermostat, flexible sensor protection tube DN10, brass sensor sleeve, plastic nails, installation instructions. The self-adhesive thin-bed heating mat with one connection cable is pre-assembled and ready for installation, specially designed for installation in leveling compound or flexible adhesive directly under the floor covering. Due to its low installation height of only 3.2mm, it is ideal for the renovation and modernization of bathrooms, showers, kitchens, etc. This floor tempering system is particularly suitable for retrofitting in angular and/or large rooms, as there is no need to route the second connection back. The Teflon-insulated heating cable with additional protective braiding for use with an RCD, is applied to a plastic mesh. The length of the connection cables is 4.0 m. Cold conductor: 1 x 4m, 1.0mm², Voltage: 230 V, Nominal limit temperature: 120°C, Specific heating power: 150 W/m², Length load: 11W, Insulation: PVDF / FEP, Resistance tolerance: +10% / -5%, Minimum laying temperature: 5°C, Smallest bending radius: 6 x dA, Calculation width 50 cm, Delivery width: 48 cm, Mat height: 3.2 mm, Protection class: IPX7, Approval: EN 60335-2-96, Area 7.0 m², 0.5 x 14.0 m