DEVImat Set 150/Touch (DTIF) 900W 50x1200cm 6m² – 140F0824

Thin-bed set with touch thermostat, flexible sensor protection tube DN10, brass sensor sleeve, plastic nails, installation instructions. The self-adhesive thin-bed heating mat with one connection cable is pre-assembled and ready for installation, and was specially developed for installation in levelling compound or flexible adhesive directly beneath the floor covering. Due to its low installation height of only 3.2mm, it is ideal for the renovation and modernisation of bathrooms, showers, kitchens, etc. This floor tempering system is particularly suitable for subsequent installation in winding and/or large rooms, as the return of the second connection is not required. The Teflon-insulated heating cable with additional protective braiding for use with an RCD, is applied to a plastic mesh. The length of the connection cables is 4.0m. Cold conductor: 1x4m, 1.0mm², Voltage: 230V, Rated limit temperature: 120°C, Specific heating output: 150W/m², Linear load: 11W, Insulation: PVDF/FEP, Resistance tolerance: +10%/-5%, Minimum installation temperature: 5°C, Smallest bending radius: 6xdA, Calculation width 50cm, Delivery width: 48cm, Mat height: 3.2mm, Protection class: IPX7, Approval: EN 60335-2-96, Area 6.0m², 0.5x12.0m