DEVImat Set 150/Touch (DTIF) 750W 50x1000cm 5m² – 140F0823

Thin-bed set with touch thermostat, flexible sensor protection tube DN10, brass sensor sleeve, plastic nails, mounting instructions. The self-adhesive thin-bed heating mat with a connection cable is ready-to-install and was specially developed for installation in leveling compound or flexible adhesive directly under the floor covering. Due to its low installation height of only 3.2 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This floor tempering system is particularly suitable for retrofitting in intricate and/or large rooms, as the second connection does not need to be routed back. The Teflon-insulated heating cable with additional protective braiding for use with an RCD, is applied to a plastic mesh. The length of the connection cables is 4.0 m. Cold conductor: 1 x 4m, 1.0mm², Voltage: 230 V, Nominal limit temperature: 120°C, Specific heating output: 150 W/m², Length load: 11W, Insulation: PVDF / FEP, Resistance tolerance: +10% / -5%, Minimum installation temperature: 5°C, Smallest bending radius: 6 x dA, Calculation width 50 cm, Delivery width: 48 cm, Mat height: 3.2 mm, Protection class: IPX7, Approval: EN 60335-2-96, Area 5.0 m², 0.5 x 10.0 m