DEVImat Set 150/Touch (DTIF) 525W 50x700cm 3.5m² – 140F0821

Thin-bed set with touch thermostat, flexible sensor protection tube DN10, brass sensor sleeve, plastic nails, installation instructions. The self-adhesive thin-bed heating mat with a connection cable is ready for installation and has been specially developed for installation in leveling compound or flexible adhesive directly under the floor covering. Due to its low installation height of only 3.2mm, it is ideal for the renovation and modernization of bathrooms, showers, kitchens, etc. This floor temperature control system is particularly suitable for retrofitting in convoluted and/or large rooms, as the return of the second connection is not required. The Teflon-insulated heating cable with additional protective braiding for use with an RCD, is applied to a plastic mesh. The length of the connection cables is 4.0 m, cold conductor: 1 x 4m, 1.0mm², voltage: 230 V, rated limit temperature: 120°C, specific heating output: 150 W/m², linear load: 11W, insulation: PVDF / FEP, resistance tolerance: +10% / -5%, minimum installation temperature: 5°C, smallest bending radius: 6 x dA, calculated width 50 cm, delivery width: 48 cm, mat height: 3.2 mm, protection class: IPX7, approval: EN 60335-2-96, area 3.5 m², 0.5 x 7.0 m