DEVImat Set 150/Touch (DTIF) 375W 50x500cm 2.5m²

Thin-bed set with touch thermostat, flexible sensor protection pipe DN10, brass sensor sleeve, plastic nails, mounting instructions. The self-adhesive thin-bed heating mat with one connecting cable is pre-assembled and ready for installation, and was specially developed for installation in levelling compound or flexible adhesive directly beneath the floor covering. Due to its low installation height of only 3.2 mm, it is ideal for the renovation and modernization of bathrooms, showers, kitchens, etc. This floor heating system is particularly suitable for subsequent installation in winding and/or large rooms, as the return of the second connection is not required. The Teflon-insulated heating cable with additional protective braiding for use with the RCD circuit breaker is applied to a plastic mesh. The length of the connecting cables is 4.0 m. Cold conductor: 1 x 4m, 1.0mm², Voltage: 230 V, Nominal limit temperature: 120°C, Specific heating output: 150 W/m², Length load: 11W, Insulation: PVDF / FEP, Resistance tolerance: +10% / -5%, Minimum installation temperature: 5°C, Smallest bending radius: 6 x dA, Calculation width 50 cm, Delivery width: 48 cm, Mat height: 3.2 mm, Protection class: IPX7, Approval: EN 60335-2-96, Area 2.5 m², 0.5 x 5.0 m