DEVImat Set 150/Touch (DTIF) 300W 50x400cm 2m² – 140F0818

Thin-bed set with touch thermostat, flexible sensor protection tube DN10, brass sensor sleeve, plastic nails, installation instructions. The self-adhesive thin-bed heating mat with one connection cable is pre-assembled ready for installation and has been specially developed for installation in leveling compound or flexible adhesive directly beneath the floor covering. Due to its low construction height of only 3.2 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This floor tempering system is particularly suitable for retrofitting in angular and/or large rooms, as there is no need to return the second connection. The Teflon-insulated heating cable with additional protective braiding for use with an RCD, is applied to a plastic mesh. The length of the connection cables is 4.0 m. Cold conductor: 1 x 4m, 1.0mm², Voltage: 230 V, Rated limit temperature: 120°C, Specific heating output: 150 W/m², Linear load: 11W, Insulation: PVDF / FEP, Resistance tolerance: +10% / -5%, Minimum installation temperature: 5°C, Smallest bending radius: 6 x dA, Calculation width: 50 cm, Delivery width: 48 cm, Mat height: 3.2 mm, Protection class: IPX7, Approval: EN 60335-2-96, Area 2.0 m², 0.5 x 4.0 m