DEVImat Set 150/Touch (DTIF) 225W 50x300cm 1.5sqm

Thin-bed set with touch thermostat, flexible sensor protection tube DN10, brass sensor sleeve, plastic nails, installation instructions. The self-adhesive thin-bed heating mat with one connection cable is pre-assembled and ready for installation and has been specially developed for installation in levelling compound or flexible adhesive directly under the floor covering. Due to its low construction height of only 3.2mm, it is ideal for the renovation and modernisation of bathrooms, showers, kitchens, etc. This floor temperature control system is particularly suitable for subsequent installation in winding and/or large rooms, as the return of the second connection is not necessary. The Teflon-insulated heating cable with additional protective braiding for the use of the RCD circuit is applied to a plastic mesh. The length of the connection cables is 4.0 m. Cold conductor: 1 x 4m, 1.0mm², Voltage: 230 V, Rated limit temperature: 120°C, specific heating power: 150 W/m², Length load: 11W, Insulation: PVDF / FEP, Resistance tolerance: +10% / -5%, Minimum laying temperature: 5°C, Smallest bending radius: 6 x dA, Calculation width 50 cm, Delivery width: 48 cm, Mat height: 3.2 mm, Protection class: IPX7, Approval: EN 60335-2-96, Area 1.5 m², 0.5 x 3.0 m