Wireless Actuator Impulse Switch Relay, 8-24V UC, 1 N/O contact 10A – 30100004

1 NO contact, potential-free 10A/250V AC, 230V LED lamps up to 400W, incandescent lamps 2000 watts. Revert delay with switch-off warning and push-button permanent light can be switched on. Encrypted wireless, bidirectional wireless and repeater function can be switched on. Stand-by loss only 0.3-0.8 watt. For flush mounting. 45mm long, 45mm wide, 33mm deep. Supply and control voltage local 8 to 24V UC. In case of supply voltage failure, the switching state is maintained. When the supply voltage returns, it is switched off in a defined manner. After installation, wait for the automatic short synchronization before connecting the switched consumer to the mains. In addition to the wireless control input via an internal antenna, this wireless actuator can also be controlled locally with a conventional control push-button that may be mounted in front of it. A glow lamp current is not permitted. Encrypted sensors can be taught-in. Bidirectional wireless and/or a repeater function can be switched on. Every change of state as well as received central control telegrams are then confirmed with a wireless telegram. This wireless telegram can be taught-in into other actuators such as FSR61NP-230V, controllers and universal displays. Scene control: With one of the four control signals of a push-button with double rocker taught-in as a scene push-button, several FSR61 can be switched on or off to form a scene. With the upper rotary switch, up to 35 wireless push-buttons are assigned in the LRN position, including one or more central control push-buttons. Also, wireless window-door contacts with NO or NC function when the window is open, wireless outdoor brightness sensors FAH and wireless motion detectors FBH. Then the desired function of this impulse switching relay is selected: ER = switching relay. ESV = impulse switch. If necessary with revert delay, then +push-button permanent light = ESV with push-button permanent light, +switch-off warning = ESV with switch-off warning, +push-button permanent light and switch-off warning = ESV with push-button permanent light and switch-off warning. If push-button permanent light is switched on, pressing for longer than 1 second will switch to permanent light, which is automatically switched off after 2 hours or can be switched off by pressing. If the switch-off warning is switched on, the lighting flashes approx. 30 seconds before the time expires and a total of 3 times at shortening intervals. If both switch-off warning and push-button permanent light are switched on, the switch-off warning only occurs after the permanent light has been switched off automatically. With the lower rotary switch, the revert delay can be set from 2 to 120 minutes in the ESV function. In the infinity position, normal impulse switch function ES without revert delay, without push-button permanent light and without switch-off warning. In the ER = switching relay position of the other rotary switch, this second rotary switch fulfills a safety and power saving function in all settings except infinity: If the switch-off command is not recognized, e.g. due to a sticky or too hastily operated push-button, the relay switches off automatically after the adjustable time between 2 and 120 seconds has elapsed. If an FTK has been taught-in, this time function is switched off. Twilight switch with taught-in wireless outdoor brightness sensor FAH and motion detection with taught-in wireless motion detector FBH according to the operating instructions. The LED accompanies the teaching-in process according to the operating instructions and indicates wireless control commands by short flashing during operation.