Emergency Call Set, Series AS, alpine white – NRSAS0834WW

consists of a pull-cord button, call module, reset button, and power supply unit (screw mounting, without mounting claws). Complete with a single frame. The JUNG emergency call system is used for summoning help in accessible toilet facilities. It complies with the safety requirements of DIN VDE 0834. The emergency call system has a modular design. The following four components are available together as a complete emergency call set:.. Pull-cord button An emergency call can be triggered in the bathroom/WC via an easily accessible pull cord. The pull-cord button can also be installed in the middle of the room on the ceiling to be easily accessible for people in need of assistance. A successful call trigger is signaled by a red reassuring lamp on the button. Call Module The call module can be installed, for example, outside next to the WC door or corridor door. A triggered emergency call is signaled here optically by a red LED and acoustically by a buzzer, 90 dB(A). Both signals can optionally be switched from continuous light/continuous tone to flashing light/pulsating tone. Reset button The reset button is installed next to the door in the same room as the pull-cord button. The assisting personnel can reset the triggered call there. Power supply unit for supplying the emergency call system with DC 24 V. Duty room unit, duty room terminal, and call button are available separately. The duty room unit can be installed, for example, in a staff room or reception area. A green button indicates presence, a yellow button suppresses the acoustic emergency call signal of the call module for 20 seconds. The components of the JUNG emergency call system are supplemented with frames from the AS / A, CD, or LS series, allowing for a uniform design throughout the building. The frames are already included in the complete emergency call set. For expanding a system, the components are also available individually.