DEVIasphalt 300T (DTIK) 5840W 400V 1x19m 19sqm – 83900178
€ 1.199,90 exkl. USt.
DEVIasphalt 300T (DTIK) 5840W 400V 1x19m 19sqm – 83900178 is backordered and will ship as soon as it is back in stock.
Ready-to-install heating mat with one connection cable, suitable for embedding in asphalt surfaces. The heating cable meets the requirements of IEC 60800 and EN 62395. With additional protective braiding for use with an RCD. Including factory-mounted waterproof sleeve and a 10m cold lead. Voltage: 400 V, Rated limit temperature: 90°C, Installation temperature: short-term 240°C, Deformation resistance 2000 N, Tensile strength: 120 N, Heating conductor insulation: Teflon, Cold lead: 1 x 10m 2.5mm², Specific heating output: 300 W/m², Resistance tolerance: +10% / -5%, Minimum installation temperature: 5°C, Minimum bending radius: 5 x dA, Protection class: IP X7, Area: 19.0 m², 1.00 x 19.00 m, 5840 W
€ 1.199,90 exkl. USt.
DEVIasphalt 300T (DTIK) 5840W 400V 1x19m 19sqm – 83900178 is backordered and will ship as soon as it is back in stock.
Technische Parameter
Technische Parameter
| Design | Heating cable | With carrier mat | Yes |
| Fixation of the heating conductor | glued | Self-adhesive | No |
| Connection voltage | 400..400 V | Connected load | 5840..5840 W |
| Power | 300 W/m² | Heating conductor load | 30 W/m |
| Resistance | 27.8 Ohm | Number of cold conductors | 1 |
| Length of cold leads | 10000 mm | Suitable for damp rooms | No |
| Suitable as open area heating | Yes | Suitable as roof heating | No |
| Area | 19 m² | Length | 19000 mm |
| Width | 1000 mm | Thickness | 7 mm |
| With controller | No | With room thermostat | No |
| With floor temperature sensor | No |