DEVIasphalt 300T (DTIK) 0.75x25.4m 19.05m² 5750W – 83900173
€ 1.199,90 exkl. USt.
DEVIasphalt 300T (DTIK) 0.75x25.4m 19.05m² 5750W – 83900173 is backordered and will ship as soon as it is back in stock.
Ready-to-install heating mat with a connecting cable, suitable for embedding in asphalt surfaces. The heating cable meets the requirements of IEC 60800 and EN 62395. With additional protective braiding for use with an RCD. Includes a factory-installed waterproof sleeve and a 10m long cold lead. Voltage: 400 V, Rated limit temperature: 90°C, Installation temperature: short-term 240°C, Deformation resistance: 2000 N, Tensile strength: 120 N, Heating conductor insulation: Teflon, Cold lead: 1 x 10m 2.5mm², Specific heating output: 300 W/m², Resistance tolerance: +10% / -5%, Minimum installation temperature: 5°C, Minimum bending radius: 5 x dA, Protection class: IP X7, Area: 19.1 m², 0.75 x 25.40 m, 5750 W
€ 1.199,90 exkl. USt.
DEVIasphalt 300T (DTIK) 0.75x25.4m 19.05m² 5750W – 83900173 is backordered and will ship as soon as it is back in stock.
Technische Parameter
Technische Parameter
| Power | 300 W/m² | Suitable as roof heating | No |
| With carrier mat | Yes | Heating conductor load | 30 W/m |
| Number of cold leads | 1 | Area | 19.1 m² |
| Resistance | 27.8 Ohm | With controller | No |
| Design | Heating cable | Suitable for damp rooms | No |
| Connection power | 5750..5750 W | With floor temperature sensor | No |
| Connection voltage | 400..400 V | Suitable as open-air heating | Yes |
| Self-adhesive | No | Length of cold lead | 10000 mm |
| Width | 750 mm | With room thermostat | No |
| Fixing of heating conductor | glued | Thickness | 7 mm |
| Length | 25400 mm |