DEVIasphalt 300T (DTIK) 0.75x19.4m 14.55m² 4270W – 83900172
€ 930,10 exkl. USt.
DEVIasphalt 300T (DTIK) 0.75x19.4m 14.55m² 4270W – 83900172 is backordered and will ship as soon as it is back in stock.
Ready-to-install heating mat with a connection cable, suitable for embedding in asphalt surfaces. The heating cable meets the requirements of IEC 60800 and EN 62395. With additional protective braiding for use with an RCD. Including a factory-mounted watertight sleeve and a 10m cold lead. Voltage: 400 V, Rated limit temperature: 90°C, Installation temperature: short-term 240°C, Deformation resistance 2000 N, Tensile strength: 120 N, Heating conductor insulation: Teflon, Cold lead: 1 x 10m 2.5mm², Specific heating output: 300 W/m², Resistance tolerance: +10% / -5%, Minimum installation temperature: 5°C, Minimum bending radius: 5 x dA, Protection class: IP X7, Area: 14.6 m², 0.75 x 19.40 m, 4270 W
€ 930,10 exkl. USt.
DEVIasphalt 300T (DTIK) 0.75x19.4m 14.55m² 4270W – 83900172 is backordered and will ship as soon as it is back in stock.
Technische Parameter
Technische Parameter
| Design | Heating cable | With carrier mat | Yes |
| Fixation of the heating conductor | glued | Self-adhesive | No |
| Connection voltage | 400..400 V | Connection power | 4270..4270 W |
| Power | 300 W/m² | Heating conductor load | 30 W/m |
| Resistance | 37.5 Ohm | Number of cold conductors | 1 |
| Length of cold conductors | 10000 mm | Suitable for damp rooms | No |
| Suitable for outdoor area heating | Yes | Suitable for roof heating | No |
| Area | 14.6 m² | Length | 19400 mm |
| Width | 750 mm | Thickness | 7 mm |
| With controller | No | With room thermostat | No |
| With floor temperature sensor | No |