DEVIasphalt 300T (DTIK) 0.75x16m 12sqm 3625W – 83900171
€ 773,90 exkl. USt.
DEVIasphalt 300T (DTIK) 0.75x16m 12sqm 3625W – 83900171 is backordered and will ship as soon as it is back in stock.
Ready-to-install heating mat with one connection cable, suitable for embedding in asphalt surfaces. The heating cable meets the requirements of IEC 60800 and EN 62395. With additional protective braiding for use with RCD protection. Including factory-fitted watertight sleeve and a 10m cold lead. Voltage: 400 V, rated limit temperature: 90°C, installation temperature: temporarily 240°C, deformation resistance 2000 N, tensile strength: 120 N, heating conductor insulation: Teflon, cold lead: 1 x 10m 2.5mm², specific heating power: 300 W/m², resistance tolerance: +10% / -5%, minimum installation temperature: 5°C, minimum bending radius: 5 x dA, protection class: IP X7, area: 12.0 m², 0.75 x 16.00 m, 3625 W
€ 773,90 exkl. USt.
DEVIasphalt 300T (DTIK) 0.75x16m 12sqm 3625W – 83900171 is backordered and will ship as soon as it is back in stock.
Technische Parameter
Technische Parameter
| Suitable for roof heating | No | Length | 16000 mm |
| With controller | No | Suitable for open-area heating | Yes |
| With carrier mat | Yes | Area | 12 m² |
| Heating conductor load | 30 W/m | Number of cold leads | 1 |
| Suitable for wet rooms | No | Fixing of the heating conductor | glued |
| With room thermostat | No | With floor temperature sensor | No |
| Self-adhesive | No | Connected load | 3625..3625 W |
| Length of cold leads | 10000 mm | Width | 750 mm |
| Connection voltage | 400..400 V | Design | Heating cable |
| Power | 300 W/m² | Resistance | 44.1 Ohm |
| Thickness | 7 mm |