DEVIasphalt 300T (DTIK) 0.75x8m 6m² 1750W – 83900168
€ 479,25 exkl. USt.
DEVIasphalt 300T (DTIK) 0.75x8m 6m² 1750W – 83900168 is backordered and will ship as soon as it is back in stock.
Ready-to-install heating mat with a connecting cable, suitable for embedding in asphalt surfaces. The heating cable meets the requirements of IEC 60800 and EN 62395. With additional protective braiding for use with an RCD (residual current device). Including factory-fitted waterproof sleeve and a 10m cold lead. Voltage: 400 V, rated limit temperature: 90°C, installation temperature: short-term 240°C, deformation resistance 2000 N, tensile strength: 120 N, heating conductor insulation: Teflon, cold lead: 1 x 10m 2.5mm², specific heating power: 300 W/m², resistance tolerance: +10% / -5%, minimum installation temperature: 5°C, minimum bending radius: 5 x dA, protection class: IP X7, area: 6.0 m², 0.75 x 8.00 m, 1750 W
€ 479,25 exkl. USt.
DEVIasphalt 300T (DTIK) 0.75x8m 6m² 1750W – 83900168 is backordered and will ship as soon as it is back in stock.
Technische Parameter
Technische Parameter
| Power | 300 W/m² | Heating conductor load | 30 W/m |
| Suitable as an open-area heater | Yes | Suitable as a roof heater | No |
| With room thermostat | No | Version | Heating cable |
| Resistance | 91.4 Ohm | Number of cold conductors | 1 |
| Length of cold conductors | 10000 mm | With floor temperature sensor | No |
| Fixing of the heating conductor | glued | Self-adhesive | No |
| Suitable for damp rooms | No | Width | 750 mm |
| Length | 8000 mm | Thickness | 7 mm |
| With carrier mat | Yes | Connection voltage | 400..400 V |
| Area | 6 m² | With controller | No |
| Connected load | 1750..1750 W |