DEVIasphalt 300T (DTIK) 0.75x4.8m 3.6m² 1050W – 83900167
€ 380,56 exkl. USt.
DEVIasphalt 300T (DTIK) 0.75x4.8m 3.6m² 1050W – 83900167 is backordered and will ship as soon as it is back in stock.
Ready-to-install heating mat with one connection cable, suitable for embedding in asphalt surfaces. The heating cable meets the requirements of IEC 60800 and EN 62395. With additional protective braiding for use with RCDs. Including factory-mounted waterproof sleeve and a 10m cold lead. Voltage: 400 V, rated limit temperature: 90°C, installation temperature: short-term 240°C, deformation resistance 2000 N, tensile strength: 120 N, heating conductor insulation: Teflon, cold lead: 1 x 10m 2.5mm², specific heating power: 300 W/m², resistance tolerance: +10% / -5%, minimum installation temperature: 5°C, minimum bending radius: 5 x dA, protection class: IP X7, area: 3.6 m², 0.75 x 4.80 m, 1050 W
€ 380,56 exkl. USt.
DEVIasphalt 300T (DTIK) 0.75x4.8m 3.6m² 1050W – 83900167 is backordered and will ship as soon as it is back in stock.
Technische Parameter
Technische Parameter
| Design | Heating cable | With carrier mat | Yes |
| Fixing of the heating conductor | glued | Self-adhesive | No |
| Connection voltage | 400..400 V | Connected load | 1050..1050 W |
| Power | 300 W/m² | Heating conductor load | 30 W/m |
| Resistance | 152 Ohm | Number of cold conductors | 1 |
| Length of cold conductors | 10000 mm | Suitable for damp rooms | No |
| Suitable as open-air heating | Yes | Suitable as roof heating | No |
| Area | 3.6 m² | Length | 4800 mm |
| Width | 750 mm | Thickness | 7 mm |
| With controller | No | With room thermostat | No |
| With floor temperature sensor | No |