DEVIasphalt 300T (DTIK) 0.75x3.2m 2.4m² 700W – 83900166
€ 330,15 exkl. USt.
DEVIasphalt 300T (DTIK) 0.75x3.2m 2.4m² 700W – 83900166 is backordered and will ship as soon as it is back in stock.
Ready-to-install heating mat with a connection cable, suitable for embedding in asphalt surfaces. The heating cable meets the requirements of IEC 60800 and EN 62395. With additional protective braiding for use with RCD protection. Includes factory-mounted waterproof sleeve and a 10m cold lead. Voltage: 400 V, rated limiting temperature: 90°C, installation temperature: short-term 240°C, deformation resistance 2000 N, tensile strength: 120 N, heating conductor insulation: Teflon, cold lead: 1 x 10m 2.5mm², specific heating power: 300 W/m², resistance tolerance: +10% / -5%, minimum installation temperature: 5°C, smallest bending radius: 5 x dA, protection class: IP X7, area: 2.4 m², 0.75 x 3.20 m, 700 W
€ 330,15 exkl. USt.
DEVIasphalt 300T (DTIK) 0.75x3.2m 2.4m² 700W – 83900166 is backordered and will ship as soon as it is back in stock.
Technische Parameter
Technische Parameter
| Self-adhesive | No | Connected load | 700..700 W |
| Power | 300 W/m² | Suitable for damp rooms | No |
| Suitable as roof heating | No | Area | 2.4 m² |
| With room thermostat | No | With floor temperature sensor | No |
| Model | Heating cable | Supply voltage | 400..400 V |
| Fixing of the heating conductor | glued | Heating conductor load | 30 W/m |
| Resistance | 229 Ohm | With support mat | Yes |
| Length | 3200 mm | Number of cold leads | 1 |
| Suitable as open-air heating | Yes | With controller | No |
| Length of cold leads | 10000 mm | Width | 750 mm |
| Thickness | 7 mm |