DEVIasphalt 300T (DTIK) 2285W 400V 0.5 x 15.8m 7.9m² – 83900165
€ 568,00 exkl. USt.
DEVIasphalt 300T (DTIK) 2285W 400V 0.5 x 15.8m 7.9m² – 83900165 is backordered and will ship as soon as it is back in stock.
Ready-to-install heating mat with a connection cable, suitable for embedding in asphalt surfaces. The heating cable meets the requirements of IEC 60800 and EN 62395. With additional protective braiding for use with RCD protection. Includes factory-mounted waterproof sleeve and a 10m cold lead. Voltage: 400 V, Rated limit temperature: 90°C, Installation temperature: short-term 240°C, Deformation resistance: 2000 N, Tensile strength: 120 N, Heating conductor insulation: Teflon, Cold lead: 1 x 10m 2.5mm², Specific heating output: 300 W/m², Resistance tolerance: +10% / -5%, Minimum installation temperature: 5°C, Minimum bending radius: 5 x dA, Protection class: IP X7, Area: 7.9 m², 0.50 x 15.80 m, 2285 W
€ 568,00 exkl. USt.
DEVIasphalt 300T (DTIK) 2285W 400V 0.5 x 15.8m 7.9m² – 83900165 is backordered and will ship as soon as it is back in stock.
Technische Parameter
Technische Parameter
| Design | Heating cable | With carrier mat | Yes |
| Fixing of the heating conductor | glued | Self-adhesive | No |
| Connection voltage | 400..400 V | Connected load | 2285..2285 W |
| Power | 300 W/m² | Heating conductor load | 30 W/m |
| Resistance | 70 Ohm | Number of cold conductors | 1 |
| Length of cold conductors | 10000 mm | Suitable for damp rooms | No |
| Suitable as open-air heating | Yes | Suitable as roof heating | No |
| Area | 7.9 m² | Length | 15800 mm |
| Width | 500 mm | Thickness | 7 mm |
| With controller | No | With room thermostat | No |
| With floor temperature sensor | No |