DEVIasphalt 300T (DTIK) 1050W 400V 0.5x7m 3.5m² – 83900163
€ 369,20 exkl. USt.
DEVIasphalt 300T (DTIK) 1050W 400V 0.5x7m 3.5m² – 83900163 is backordered and will ship as soon as it is back in stock.
Ready-to-install heating mat with one connecting cable, suitable for embedding in asphalt surfaces. The heating cable meets the requirements of IEC 60800 and EN 62395. With additional protective braiding for use with RCD protection. Includes a factory-installed waterproof sleeve and a 10m cold lead. Voltage: 400 V, rated limit temperature: 90°C, installation temperature: short-term 240°C, deformation resistance 2000 N, tensile strength: 120 N, heating conductor insulation: Teflon, cold lead: 1 x 10m 2.5mm², specific heating power: 300 W/m², resistance tolerance: +10% / -5%, minimum installation temperature: 5°C, minimum bending radius: 5 x dA, protection class: IP X7, area: 3.5 m², 0.50 x 7.00 m, 1050 W
€ 369,20 exkl. USt.
DEVIasphalt 300T (DTIK) 1050W 400V 0.5x7m 3.5m² – 83900163 is backordered and will ship as soon as it is back in stock.
Technische Parameter
Technische Parameter
| Suitable for roof surface heating | No | Version | Heating cable |
| Area | 3.5 m² | With carrier mat | Yes |
| Length | 7000 mm | Fixing of the heating conductor | glued |
| Width | 500 mm | Self-adhesive | No |
| Thickness | 7 mm | Connection voltage | 400..400 V |
| With controller | No | Connected load | 1050..1050 W |
| With room thermostat | No | Power | 300 W/m² |
| With floor temperature sensor | No | Heating conductor load | 30 W/m |
| Resistance | 148 Ohm | Number of cold conductors | 1 |
| Length of cold leads | 10000 mm | Suitable for wet rooms | No |
| Suitable as open-air heating | Yes |