DEVIasphalt 300T (DTIK) 520W 400V 0.5x3.4m 1.7m² – 83900162
€ 318,08 exkl. USt.
DEVIasphalt 300T (DTIK) 520W 400V 0.5x3.4m 1.7m² – 83900162 is backordered and will ship as soon as it is back in stock.
Ready-to-install heating mat with one connecting cable, suitable for embedding in asphalt surfaces. The heating cable meets the requirements of IEC 60800 and EN 62395. With additional protective braiding for use with RCD protection. Includes factory-mounted waterproof sleeve and a 10m long cold lead. Voltage: 400 V, rated limit temperature: 90°C, installation temperature: short-term 240°C, deformation resistance: 2000 N, tensile strength: 120 N, heating conductor insulation: Teflon, cold lead: 1 x 10m 2.5mm², specific heating output: 300 W/m², resistance tolerance: +10% / -5%, minimum installation temperature: 5°C, minimum bending radius: 5 x dA, protection class: IP X7, area: 1.7 m², 0.50 x 3.40 m, 520 W
€ 318,08 exkl. USt.
DEVIasphalt 300T (DTIK) 520W 400V 0.5x3.4m 1.7m² – 83900162 is backordered and will ship as soon as it is back in stock.
Technische Parameter
Technische Parameter
| Design | Heating cable | With carrier mat | Yes |
| Fixing of heating conductor | glued | Self-adhesive | No |
| Connection voltage | 400..400 V | Connected load | 520..520 W |
| Power | 300 W/m² | Heating conductor load | 30 W/m |
| Resistance | 305 Ohm | Number of cold leads | 1 |
| Length of cold leads | 10000 mm | Suitable for damp rooms | No |
| Suitable as open-area heating | Yes | Suitable as roof heating | No |
| Area | 1.7 m² | Length | 3400 mm |
| Width | 500 mm | Thickness | 7 mm |
| With controller | No | With room thermostat | No |
| With floor temperature sensor | No |